Error 621 appears in the display of the CP plus panel – what should I do?
Error 621 appears in the display of the CP plus panel – what should I do? This error is displayed flashing during the first commissioning
Error 621 appears in the display of the CP plus panel – what should I do? This error is displayed flashing during the first commissioning
We recommend that you clean the Truma S heater before starting your holiday. Remove the cover from the S heater. Remove the dust that has
Mixed mode of your Combi 6 E heater works like this: On the power selector switch you can select mixed mode 1 or 2. Mixed
1 Control panel 2 Gas connection 3 Solenoid valve 4 Combined combustion air/exhaust cowl 5 Combustion air fan 6 Gas burner 7 Ignition electrode
The heater is supplied with gas via a special connection (1). It is ignited by a battery-operated auto ignitor (2) in the burner (3).
At least three outlets of the Trumatic C 4002 must be connected to the warm air distribution to prevent the appliance overheating. However, all 4
Exhaust ducts must always be laid rising from the Truma heater towards the cowl. If the exhaust gases from your Trumatic S still pass through
Yes. Simply set the switch to summer mode and select 40 or 60 degrees Celsius water temperature. When the yellow LED on the control panel
No. The heating elements are integrated in the heat exchanger of the Trumatic C 6002 EH. The heat exchanger of the Trumatic C 4002 is
No. Our current appliances are approved only for recreational vehicles. Therefore, installation in an awning is unfortunately not allowed. But you can retrofit your Truma
