The fault 507, 516 or 517 appears in the display of the digital control panel CP plus – what must I do?
Remedy fault 507 / 516 / 517 (gas supply interrupted) Restore the gas supply, for example by connecting a full gas cylinder. Then confirm or
Remedy fault 507 / 516 / 517 (gas supply interrupted) Restore the gas supply, for example by connecting a full gas cylinder. Then confirm or
The heater does not have 12 Volt power supply or there is no connection between the heater and the CP plus control panel. The power
Combi E in mixed mode (combined gas and electric heating operation): Warning indicates lack of gas supply. The heater now only runs in electric mode.
Your heater includes a window switch which prevents the heater from starting up if the side window above or right next to wall cowl of
The Trumatic C 4002 has 600 W more heat output and has a more powerful circulating air motor to distribute the warm air.
Occasional cleaning of the Trumatic S fan wheel is advisable. Clean the blades using a brush with hard bristles or compressed air. The fan should
The digital CP plus iNet ready control panel can be retrofitted with all Truma Combi heaters. Truma has been producing Combi heaters since 2007, they
This function protects the unit from possible overheating caused by heat build-up. The circulating air motor gives off the possible heat build-up into the vehicle
If your Truma air conditioner is not cooling, it could be due to one of the following reasons: – The thawing process is running. Wait
There are many reasons why your Truma air conditioner may not respond to commands from the remote control: Check whether there are any obstructions
