Yes, the Alde 3020 can be connected to a Truma air conditioner to complete the iNet X system. Please note the compatibility list. The air
With the iNet X (Pro) panel, one air conditioner can currently be connected. According to the compatibility list , this can be a Truma Aventa roof-mounted
Depending on the operating system, the following steps must be performed: Android: Disconnect the panel via the app (App – Settings – Device manager –
There are two LEDs on the back of the panel that indicate the operating status of the control unit as soon as 12V are applied
Which Dometic air conditioners can be integrated into the iNet X system can be found in the compatibility list.Currently, only the Dometic FreshJet 1700, FreshJet
If the iNet X app has not been used for several months or has only been used without internet, the iNet X account is automatically
The error message is displayed as plain text in the first step. For the service case, we require the error number / error code for clear
The Dometic air conditioner is connected directly to the iNet X (Pro) panel via CI Bus. Note the compatibility list: Unfortunately, we cannot make any
When the iNet X (Pro) Panel is connected to the iNet X app for the first time, a PIN must be entered.As soon as the
The iNet X (Pro) panel also supports both devices at the same time via CI (from panel version 3.0.15). Note the compatibility list: https://www.truma.com/compability-inet-x-pro-panel/
