How do I set hot water boost on the CP plus iNet ready?
The video “Truma CP plus iNet ready, Section 3 – Warm water” shows you in just a few seconds how to set the hot water
The video “Truma CP plus iNet ready, Section 3 – Warm water” shows you in just a few seconds how to set the hot water
In our how-to video “Truma CP plus iNet ready, Section 5 – Fan” we explain in less than three minutes how to set the fan
Select the preferred energy type via the corresponding symbol “gas cylinder/arrow”. The symbol is displayed only if you use a Combi heater. In our how-to
If the manoeuvring system is not used for an hour, the control unit switches off to conserve the battery. To reactivate the system, it has
MonoControl CS (black) If the crash sensor has been triggered, it can be easily reset. Simply press the yellow reset button on the MonoControl CS
Check whether Bluetooth is switched on on your smartphone or tablet. Check that the Truma iNet Box is ready for operation. Check that the devices
You have various options to attach the Truma iNet Box, such as adhesive pads or four suitable screws. We recommend attaching it with screws, as,
DuoControl CS (black) If the crash sensor has been triggered, you can reset it yourself. So that the gas pressure regulator system is ready for
Generally, the Truma Mover manoeuvring system can be installed on most caravans. Please see the respective dimensions in our installation instructions and the installation overview.
To ensure reliable measurement, we advise that you clean the measuring head of LevelCheck regularly with a damp cloth without cleaning agent. A dirty measuring