Can I connect two air conditioners to one iNet X (Pro) panel?
With the iNet X (Pro) panel, one air conditioner can currently be connected. According to the compatibility list , this can be a Truma Aventa roof-mounted
With the iNet X (Pro) panel, one air conditioner can currently be connected. According to the compatibility list , this can be a Truma Aventa roof-mounted
Depending on the operating system, the following steps must be performed: Android: Disconnect the panel via the app (App – Settings – Device manager –
At present, we cannot offer Truma boilers that are approved for boats. Remember that the approval and warranty become invalid if you install a Truma
No. Approvals for fixed buildings have changed so that Truma water systems cannot be installed in mobile homes. Our appliances are approved for recreational vehicles.
No. Our current appliances are approved only for recreational vehicles. Therefore, installation in an awning is unfortunately not allowed. But you can retrofit your Truma
No. The heating elements are integrated in the heat exchanger of the Trumatic C 6002 EH. The heat exchanger of the Trumatic C 4002 is
Exhaust ducts must always be laid rising from the Truma heater towards the cowl. If the exhaust gases from your Trumatic S still pass through
No. Our heaters are not approved for use outside caravanning. Truma heaters may be installed only in Class O vehicles. The vehicle class can be
No. Approvals for fixed buildings have changed so that Truma heaters cannot be installed in mobile homes. Our appliances are approved for recreational vehicles. Heaters
Yes, the S 5004 can be installed in the position of the old heater if it is an S 5002 built after 05/98. With older
