What is the difference between Trumatic C 3402 and Trumatic C 4002?
The Trumatic C 4002 has 600 W more heat output and has a more powerful circulating air motor to distribute the warm air.
The Trumatic C 4002 has 600 W more heat output and has a more powerful circulating air motor to distribute the warm air.
The digital CP plus iNet ready control panel can be retrofitted with all Truma Combi heaters. Truma has been producing Combi heaters since 2007, they
Mixed mode of your Combi 6 E heater works like this: On the power selector switch you can select mixed mode 1 or 2. Mixed
At least three outlets of the Trumatic C 4002 must be connected to the warm air distribution to prevent the appliance overheating. However, all 4
This function protects the unit from possible overheating caused by heat build-up. The circulating air motor gives off the possible heat build-up into the vehicle
No. The design of the S 3004 and S 5004 were changed and made more user friendly. Almost all parts were changed. Therefore, you cannot
No. This is not possible due to the different dimensions and connections and is therefore not approved.
Apart from cowl top T-1, you can use the warm air parts and cowls without modification.
No. You cannot retrofit the heating elements in the standard model. In the electric version of the Truma Combi heater, the heating elements are integrated
Yes. Simply set the switch of the Trumatic C to summer mode and select 40 or 60 degrees Celsius water temperature. The respective water temperature