Why does the water in my Truma electric boiler not get hot?
There can be several reasons why the water in your Truma electric boiler does not get hot: Cause Remedy No power. Reconnect the power. Operation
There can be several reasons why the water in your Truma electric boiler does not get hot: Cause Remedy No power. Reconnect the power. Operation
The water in the Truma Therme is heated by the warm air of the heating system or by a 230 V electric heating element.
The Truma electric boiler can take a long time to heat if the water container is calcified. In this case, decalcify the water container with
The Truma electric boiler cannot be filled if the drain valve is open. Check the drain valve and close it if it is open.
The digital CP plus iNet ready control panel can be retrofitted with all Truma Combi heaters. Truma has been producing Combi heaters since 2007, they
The Trumatic C 4002 has 600 W more heat output and has a more powerful circulating air motor to distribute the warm air.
Yes. Simply set the switch to summer mode and select 40 or 60 degrees Celsius water temperature. When the yellow LED on the control panel
The heater is supplied with gas via a special connection (1). It is ignited by a battery-operated auto ignitor (2) in the burner (3).
1 Control panel 2 Gas connection 3 Solenoid valve 4 Combined combustion air/exhaust cowl 5 Combustion air fan 6 Gas burner 7 Ignition electrode
Yes, the dimensions have changed. Pay special attention to the red highlighted dimensions of Truma S 3004 and S 5004 compared to S 3002 and