How do I use the Truma LevelCheck properly?
Attach the Truma LevelCheck horizontally to the gas cylinder at an angle of 90°. The filling level is measured by an ultrasound signal. If liquefied
Attach the Truma LevelCheck horizontally to the gas cylinder at an angle of 90°. The filling level is measured by an ultrasound signal. If liquefied
Check whether Bluetooth is switched on on your smartphone or tablet. Check that the Truma iNet Box is ready for operation. Check that the devices
DuoControl CS (black) If the crash sensor has been triggered, you can reset it yourself. So that the gas pressure regulator system is ready for
In our how-to video “Truma CP plus iNet ready, Section 6 – Time Switch” Howie shows you in 90 seconds how to program the time
You can keep a cool head at any temperature by following the tips: – Before starting the system, check that the camp site has adequate
Pleasant warmth in no time at all – in the video “Truma CP plus iNet ready, Section 2 – Heating and Cooling” we explain in
The video “Truma CP plus iNet ready, Section 2 – Heating and Cooling” explains from minute 0:30 how to adjust your desired climate.
To ensure reliable measurement, we advise that you clean the measuring head of LevelCheck regularly with a damp cloth without cleaning agent. A dirty measuring
Connect the gas pressure regulator and/or high-pressure hoses to the gas cylinder. If you have a gas remote switch in your vehicle, set it to
The Truma SolarSet 23 in combination with the Mover PowerSet protects the battery of the Truma Mover against deep discharge. The set also maintains the
