How do I set hot water boost on the CP plus iNet ready?
The video “Truma CP plus iNet ready, Section 3 – Warm water” shows you in just a few seconds how to set the hot water
The video “Truma CP plus iNet ready, Section 3 – Warm water” shows you in just a few seconds how to set the hot water
On Single Zone models, simply press “” and you can then set your desired temperature using the plus and minus keys. You can press the
The three-stage battery discharge protection prevents the vehicle battery from being discharged. To switch it on, press the “” button three times and then select
A set-up wizard in the Truma App explains step-by-step what you have to do (e.g. enter the SIM PIN). The Truma iNet Box has just
To switch on the Bluetooth function, press the “” button four times on Single Zone models and five times on Dual Zone models. You can
With these settings, Truma Aventa will cool your caravan or motor home very quickly: – Fan speed high – Air distribution front/back on middle setting
Select the preferred energy type via the corresponding symbol “gas cylinder/arrow”. The symbol is displayed only if you use a Combi heater. In our how-to
If the manoeuvring system is not used for an hour, the control unit switches off to conserve the battery. To reactivate the system, it has
In Germany, the gas system must be inspected every two years by an LPG expert (DVFG, TÜV, DEKRA). This is documented with an inspection certificate
MonoControl CS (black) If the crash sensor has been triggered, it can be easily reset. Simply press the yellow reset button on the MonoControl CS
