Can I install a Truma boiler in a boat?
At present, we cannot offer Truma boilers that are approved for boats. Remember that the approval and warranty become invalid if you install a Truma
At present, we cannot offer Truma boilers that are approved for boats. Remember that the approval and warranty become invalid if you install a Truma
No. Approvals for fixed buildings have changed so that Truma water systems cannot be installed in mobile homes. Our appliances are approved for recreational vehicles.
Close the drain and aeration valves (4) completely. With premixers Set the control button (2) of the premixer valve all the way to the red
Exhaust ducts must always be laid rising from the Truma heater towards the cowl. If the exhaust gases from your Trumatic S still pass through
No. The heating elements are integrated in the heat exchanger of the Trumatic C 6002 EH. The heat exchanger of the Trumatic C 4002 is
No. Our current appliances are approved only for recreational vehicles. Therefore, installation in an awning is unfortunately not allowed. But you can retrofit your Truma
Mixed mode of your Combi 6 E heater works like this: On the power selector switch you can select mixed mode 1 or 2. Mixed
At least three outlets of the Trumatic C 4002 must be connected to the warm air distribution to prevent the appliance overheating. However, all 4
This function protects the unit from possible overheating caused by heat build-up. The circulating air motor gives off the possible heat build-up into the vehicle
No. Approvals for fixed buildings have changed so that Truma heaters cannot be installed in mobile homes. Our appliances are approved for recreational vehicles. Heaters
