How can the Truma Cooler be properly cleaned?
First step: The appliance must be disconnected from all power sources prior to commencing cleaning. The Truma Cooler can then be cleaned on the inside
First step: The appliance must be disconnected from all power sources prior to commencing cleaning. The Truma Cooler can then be cleaned on the inside
No, Truma MonoControl CS requires no maintenance. However, in Germany, the gas system must be inspected every two years by an LPG expert (DVFG, TÜV,
Generally, the Truma Mover manoeuvring system can be installed on most caravans. Please see the respective dimensions in our installation instructions and the installation overview.
If you see an oil leak in the transmission when you install your Truma Mover or replace the gearbox unit, this is not a defect.
We advise you to remove the battery from the vehicle. Observe the following storage tips: – Lead batteries should always be stored fully charged. –
The Truma Cooler has a priority circuit for 230 V. This means that once 230 V is connected, the 12 V DC input/output is automatically
No. Warm air ducts offer no insulation to protect against the build-up of condensation. Condensation would form on the outer cardboard layer of the warm
No, because the previous EisEx was clipped onto the regulator. The new EisEx is smaller and is inserted directly into the gas pressure regulator. This
