The Truma iNet Box does not switch off when I press the button – why?
The Truma iNet Box has no on/off switch but a switch can be integrated into the power line.
The Truma iNet Box has no on/off switch but a switch can be integrated into the power line.
Vehicles registered before 2007 are protected by a grandfather clause and may still be operated with a gas regulator without a crash sensor while the
No, the settings are stored permanently in the CP plus iNet ready. You only have to reset the time and the timer.
If you have a grey Combi heater in your vehicle, the PCB must be replaced and the digital CP plus iNet ready control panel must
Truma portable fridge/freezers are weather-resistant. This means they are not affected by a little spray water. They are however not designed to be left uncovered
Yes, gas cylinders may be connected while driving. They are then considered to be equipment and not hazardous materials (ADR exemption in accordance with sections
Warrantor and warranty period In connection with the manufacturer’s warranty of two years, the Truma Partner grants a parts warranty to air conditioning systems and
This could be due to various reasons: You have potentially placed too many and/or too warm products in the appliance. The lid is not
Connect the iNet Box to 12 V steady plus. Alternatively, connect the appliance to the same power supply as your Truma Combi heater.
Use Truma TIN cables. These have six wires, conventional phone cables usually have just four wires.
