The Truma electric boiler takes a very long time to heat – why?
The Truma electric boiler can take a long time to heat if the water container is calcified. In this case, decalcify the water container with
The Truma electric boiler can take a long time to heat if the water container is calcified. In this case, decalcify the water container with
There can be several reasons why the water in your Truma electric boiler does not get hot: Cause Remedy No power. Reconnect the power. Operation
The Truma electric boiler cannot be filled if the drain valve is open. Check the drain valve and close it if it is open.
Yes. Simply set the switch to summer mode and select 40 or 60 degrees Celsius water temperature. When the yellow LED on the control panel
The Trumatic C 4002 has 600 W more heat output and has a more powerful circulating air motor to distribute the warm air.
The heater is supplied with gas via a special connection (1). It is ignited by a battery-operated auto ignitor (2) in the burner (3).
1 Control panel 2 Gas connection 3 Solenoid valve 4 Combined combustion air/exhaust cowl 5 Combustion air fan 6 Gas burner 7 Ignition electrode
The digital CP plus iNet ready control panel can be retrofitted with all Truma Combi heaters. Truma has been producing Combi heaters since 2007, they
Error 621 appears in the display of the CP plus panel – what should I do? This error is displayed flashing during the first commissioning
Remedy fault 507 / 516 / 517 (gas supply interrupted) Restore the gas supply, for example by connecting a full gas cylinder. Then confirm or