How do I use the Truma LevelCheck properly?
Attach the Truma LevelCheck horizontally to the gas cylinder at an angle of 90°. The filling level is measured by an ultrasound signal. If liquefied
Attach the Truma LevelCheck horizontally to the gas cylinder at an angle of 90°. The filling level is measured by an ultrasound signal. If liquefied
With these settings, Truma Aventa will cool your caravan or motor home very quickly: – Fan speed high – Air distribution front/back on middle setting
To switch on the Bluetooth function, press the “” button four times on Single Zone models and five times on Dual Zone models. You can
A set-up wizard in the Truma App explains step-by-step what you have to do (e.g. enter the SIM PIN). The Truma iNet Box has just
The three-stage battery discharge protection prevents the vehicle battery from being discharged. To switch it on, press the “” button three times and then select
On Single Zone models, simply press “” and you can then set your desired temperature using the plus and minus keys. You can press the
The video “Truma CP plus iNet ready, Section 3 – Warm water” shows you in just a few seconds how to set the hot water
In our how-to video “Truma CP plus iNet ready, Section 5 – Fan” we explain in less than three minutes how to set the fan
To ensure reliable measurement, we advise that you clean the measuring head of LevelCheck regularly with a damp cloth without cleaning agent. A dirty measuring
DuoControl CS (black) If the crash sensor has been triggered, you can reset it yourself. So that the gas pressure regulator system is ready for
