If I connect a second air conditioner to the TIN 2 on the iNet Box, I get an error message – why?
If the first air conditioner is already connected to TIN 1, disconnect the power supply from it. Now you can connect the second air conditioner
If the first air conditioner is already connected to TIN 1, disconnect the power supply from it. Now you can connect the second air conditioner
Perhaps you entered the wrong phone number for the iNet Box in the Truma App set-up wizard. To check this, copy the iNet Box phone
Wenn Ihr Truma Cooler nicht läuft, dann überprüfen Sie bitte Folgendes: Überprüfen Sie, ob das Gerät eingeschaltet ist. Überprüfen Sie, ob der Stecker fest in
Please check the following in this order: 1. Is the green LED on the Truma iNet Box lit or flashing? If not, you have to
If you notice a build-up of moisture on the cold air pipes of your Saphir air conditioner, it may be due to high humidity in
Quiet noises are produced in normal operation. This should not be any cause for concern. A flowing liquid may be heard after switching off the
If you hear an acoustic signal four times and the red warning triangle (LED 3) also flashes when the remote control is switched on, the
The Truma iNet Box has no on/off switch but a switch can be integrated into the power line.
In this case, connect your Aventa air conditioner to the TIN-2 slot of the Truma iNet Box.
Select the preferred energy type via the corresponding symbol “gas cylinder/arrow”. The symbol is displayed only if you use a Combi heater. In our how-to
