No ACC menu is displayed in my digital CP plus iNet ready control panel – why?
The default setting of the digital CP plus iNet ready control panel is configured so that the automatic climate control, ACC is “OFF” in the
The default setting of the digital CP plus iNet ready control panel is configured so that the automatic climate control, ACC is “OFF” in the
Warrantor and warranty period In connection with the manufacturer’s warranty of two years, the Truma Partner grants a parts warranty to air conditioning systems and
This could be due to various reasons: You have potentially placed too many and/or too warm products in the appliance. The lid is not
Quiet noises are produced in normal operation. This should not be any cause for concern. A flowing liquid may be heard after switching off the
If you hear an acoustic signal four times and the red warning triangle (LED 3) also flashes when the remote control is switched on, the
The Truma iNet Box has no on/off switch but a switch can be integrated into the power line.
Connect the iNet Box to 12 V steady plus. Alternatively, connect the appliance to the same power supply as your Truma Combi heater.
Use Truma TIN cables. These have six wires, conventional phone cables usually have just four wires.
MonoControl CS (black) If the crash sensor has been triggered, it can be easily reset. Simply press the yellow reset button on the MonoControl CS
If the manoeuvring system is not used for an hour, the control unit switches off to conserve the battery. To reactivate the system, it has
