How do I set fan boost on the CP plus iNet ready?
In our how-to video “Truma CP plus iNet ready, Section 5 – Fan” we explain in less than three minutes how to set the fan
In our how-to video “Truma CP plus iNet ready, Section 5 – Fan” we explain in less than three minutes how to set the fan
The video “Truma CP plus iNet ready, Section 3 – Warm water” shows you in just a few seconds how to set the hot water
On Single Zone models, simply press “” and you can then set your desired temperature using the plus and minus keys. You can press the
The three-stage battery discharge protection prevents the vehicle battery from being discharged. To switch it on, press the “” button three times and then select
A set-up wizard in the Truma App explains step-by-step what you have to do (e.g. enter the SIM PIN). The Truma iNet Box has just
To switch on the Bluetooth function, press the “” button four times on Single Zone models and five times on Dual Zone models. You can
With these settings, Truma Aventa will cool your caravan or motor home very quickly: – Fan speed high – Air distribution front/back on middle setting
Attach the Truma LevelCheck horizontally to the gas cylinder at an angle of 90°. The filling level is measured by an ultrasound signal. If liquefied
Check whether Bluetooth is switched on on your smartphone or tablet. Check that the Truma iNet Box is ready for operation. Check that the devices
No. To use the Truma iNet Box, you need a digital CP plus iNet ready control panel. You recognise such a control panel by the