With motor homes as of construction year 01/2007, in accordance with the heating equipment directive 2001/56/EC with annexes 2004/78/EC and 2006/119/EC for the operation of
If you notice a build-up of moisture on the bottom of the air distributor, close the windows and doors in your vehicle and select a
In this case, connect your Aventa air conditioner to the TIN-2 slot of the Truma iNet Box.
On Single Zone models, simply press “” and you can then set your desired temperature using the plus and minus keys. You can press the
MonoControl CS (black) If the crash sensor has been triggered, it can be easily reset. Simply press the yellow reset button on the MonoControl CS
If the manoeuvring system is not used for an hour, the control unit switches off to conserve the battery. To reactivate the system, it has
Select the preferred energy type via the corresponding symbol “gas cylinder/arrow”. The symbol is displayed only if you use a Combi heater. In our how-to
In our how-to video “Truma CP plus iNet ready, Section 5 – Fan” we explain in less than three minutes how to set the fan
The video “Truma CP plus iNet ready, Section 3 – Warm water” shows you in just a few seconds how to set the hot water
The three-stage battery discharge protection prevents the vehicle battery from being discharged. To switch it on, press the “” button three times and then select
