How does the Truma Therme work?
The water in the Truma Therme is heated by the warm air of the heating system or by a 230 V electric heating element.
The water in the Truma Therme is heated by the warm air of the heating system or by a 230 V electric heating element.
The Truma electric boiler can take a long time to heat if the water container is calcified. In this case, decalcify the water container with
The Truma electric boiler cannot be filled if the drain valve is open. Check the drain valve and close it if it is open.
There can be several reasons why the water in your Truma electric boiler does not get hot: Cause Remedy No power. Reconnect the power. Operation
This function protects the Combi heater from possible overheating caused by heat build-up. The circulating air motor gives off the possible heat build-up into the
In the setting “Heating without water temperature monitoring” the water in the Trumatic C is also heated automatically when the boiler is full. The
To prevent heat accumulation, no warm air outlets or warm air ducts must be closed off on the Combi 6 (E). With the Combi 4
– Check whether the drain valve in the cold water supply is closed: lever horizontal, position (a). – Open the hot water tap in
Close the drain and aeration valves (4) completely. With premixers Set the control button (2) of the premixer valve all the way to the red
1 Control panel 2 Gas connection 3 Solenoid valve 4 Combined combustion air/exhaust cowl 5 Combustion air fan 6 Gas burner 7 Ignition electrode