Can the Truma heater S 5004 be installed in place of the old S 5002 and what must be considered?
Yes, the S 5004 can be installed in the position of the old heater if it is an S 5002 built after 05/98. With older
Yes, the S 5004 can be installed in the position of the old heater if it is an S 5002 built after 05/98. With older
No. Approvals for fixed buildings have changed so that Truma heaters cannot be installed in mobile homes. Our appliances are approved for recreational vehicles. Heaters
Yes, the S 3004 can be installed in the position of the old heater if it is an S 3002 built after 05/96. With older
No. Our heaters are not approved for use outside caravanning. Truma heaters may be installed only in Class O vehicles. The vehicle class can be
We recommend installation in front of the vehicle’s axle to protect the Truma Mover better from spray water from the caravan wheels. Basically, the Mover
We recommend installation as described in the installation instructions. With the position specified there, you’ll have the best Bluetooth and GSM reception. The Truma iNet
To install the sealing frame of the Truma Aventa roof-mounted air conditioning system we recommend that you use a non-hardening, removable sealant, such as Terostat
No, because of approval restrictions in the installation regulations of EN 1949 and the limited space the Truma gas filter cannot be installed on gas tanks.
You have various options to attach the Truma iNet Box, such as adhesive pads or four suitable screws. We recommend attaching it with screws, as,
Generally, the Truma Mover manoeuvring system can be installed on most caravans. Please see the respective dimensions in our installation instructions and the installation overview.
