How do I switch the Bluetooth function on or off on the Truma Cooler?
To switch on the Bluetooth function, press the “” button four times on Single Zone models and five times on Dual Zone models. You can
To switch on the Bluetooth function, press the “” button four times on Single Zone models and five times on Dual Zone models. You can
The three-stage battery discharge protection prevents the vehicle battery from being discharged. To switch it on, press the “” button three times and then select
On Single Zone models, simply press “” and you can then set your desired temperature using the plus and minus keys. You can press the
The video “Truma CP plus iNet ready, Section 3 – Warm water” shows you in just a few seconds how to set the hot water
In our how-to video “Truma CP plus iNet ready, Section 5 – Fan” we explain in less than three minutes how to set the fan
Select the preferred energy type via the corresponding symbol “gas cylinder/arrow”. The symbol is displayed only if you use a Combi heater. In our how-to
If the manoeuvring system is not used for an hour, the control unit switches off to conserve the battery. To reactivate the system, it has
MonoControl CS (black) If the crash sensor has been triggered, it can be easily reset. Simply press the yellow reset button on the MonoControl CS
Check whether Bluetooth is switched on on your smartphone or tablet. Check that the Truma iNet Box is ready for operation. Check that the devices
You have various options to attach the Truma iNet Box, such as adhesive pads or four suitable screws. We recommend attaching it with screws, as,