Where do I have to press to connect the Truma iNet Box via Bluetooth?
Start the Truma App on your smartphone or tablet and select “Remote control”. On the Truma iNet Box, press the button above the Bluetooth LED
Start the Truma App on your smartphone or tablet and select “Remote control”. On the Truma iNet Box, press the button above the Bluetooth LED
Truma LevelCheck is suitable for all steel and aluminium LPG gas cylinders with diameters of 200 to 350 mm. It cannot measure plastic cylinders because
As the two TIN-1 slots are connected in parallel, you can choose which one you use.
If an obligatory firmware update is available on the server, remote control is blocked until you complete the update. If the update is not compatible
If the compressor in your Aventa compact switches off then back on again after a short period, it means there has been a voltage drop
If you are unable to operate the Truma air conditioner using the remote control, check the batteries in the remote control and replace them if
If your Saphir comfort RC air conditioner does not heat, it may be because the thawing process is running (outdoor temperature between 4 °C –
We recommend installation in front of the vehicle’s axle to protect the Truma Mover better from spray water from the caravan wheels. Basically, the Mover
We recommend installation as described in the installation instructions. With the position specified there, you’ll have the best Bluetooth and GSM reception. The Truma iNet
To install the sealing frame of the Truma Aventa roof-mounted air conditioning system we recommend that you use a non-hardening, removable sealant, such as Terostat