Warning W 255 H appears in the display of the CP plus panel – what should I do?
The heater does not have 12 Volt power supply or there is no connection between the heater and the CP plus control panel. The power
The heater does not have 12 Volt power supply or there is no connection between the heater and the CP plus control panel. The power
Combi E in mixed mode (combined gas and electric heating operation): Warning indicates lack of gas supply. The heater now only runs in electric mode.
Your heater includes a window switch which prevents the heater from starting up if the side window above or right next to wall cowl of
Apart from cowl top T-1, you can use the warm air parts and cowls without modification.
No. The design of the S 3004 and S 5004 were changed and made more user friendly. Almost all parts were changed. Therefore, you cannot
No. This is not possible due to the different dimensions and connections and is therefore not approved.
Detailed information about the fault codes, their cause and how to fix them can be found in the Operating and Installation Instructions of the Truma CP
No. You cannot retrofit the heating elements in the standard model. In the electric version of the Truma Combi heater, the heating elements are integrated
Yes. Simply set the switch of the Trumatic C to summer mode and select 40 or 60 degrees Celsius water temperature. The respective water temperature
It is correct that you consume less gas in mixed mode, as the Truma Combi heater tries first to reach the set temperature in electric