Exhaust ducts must always be laid rising from the Truma heater towards the cowl. If the exhaust gases from your Trumatic S still pass through
Yes. Simply set the switch to summer mode and select 40 or 60 degrees Celsius water temperature. When the yellow LED on the control panel
No. The heating elements are integrated in the heat exchanger of the Trumatic C 6002 EH. The heat exchanger of the Trumatic C 4002 is
No. Our current appliances are approved only for recreational vehicles. Therefore, installation in an awning is unfortunately not allowed. But you can retrofit your Truma
Remedy fault 507 / 516 / 517 (gas supply interrupted) Restore the gas supply, for example by connecting a full gas cylinder. Then confirm or
The heater does not have 12 Volt power supply or there is no connection between the heater and the CP plus control panel. The power
Combi E in mixed mode (combined gas and electric heating operation): Warning indicates lack of gas supply. The heater now only runs in electric mode.
Your heater includes a window switch which prevents the heater from starting up if the side window above or right next to wall cowl of
The Trumatic C 4002 has 600 W more heat output and has a more powerful circulating air motor to distribute the warm air.
Occasional cleaning of the Trumatic S fan wheel is advisable. Clean the blades using a brush with hard bristles or compressed air. The fan should
