Can the Alde 3020 be retrofitted with iNet X?
The current compatibility list of the iNet X system can be found here. The prerequisite is that it is an Alde 3020 HE from year
The current compatibility list of the iNet X system can be found here. The prerequisite is that it is an Alde 3020 HE from year
First generation Combi D 6 first generation
This function protects the Combi heater from possible overheating caused by heat build-up. The circulating air motor gives off the possible heat build-up into the
In the setting “Heating without water temperature monitoring” the water in the Trumatic C is also heated automatically when the boiler is full. The
To prevent heat accumulation, no warm air outlets or warm air ducts must be closed off on the Combi 6 (E). With the Combi 4
– Check whether the drain valve in the cold water supply is closed: lever horizontal, position (a). – Open the hot water tap in
Close the drain and aeration valves (4) completely. With premixers Set the control button (2) of the premixer valve all the way to the red
Check the Truma Therme for leaks. If the Therme is leaking, the inside container must be replaced. This can be done by our mobile service
The water in the Truma Therme is heated by the warm air of the heating system or by a 230 V electric heating element.
No. Approvals for fixed buildings have changed so that Truma water systems cannot be installed in mobile homes. Our appliances are approved for recreational vehicles.
