How many of the four warm air outlets of the Trumatic C 4002 must be used?
At least three outlets of the Trumatic C 4002 must be connected to the warm air distribution to prevent the appliance overheating. However, all 4
At least three outlets of the Trumatic C 4002 must be connected to the warm air distribution to prevent the appliance overheating. However, all 4
This function protects the unit from possible overheating caused by heat build-up. The circulating air motor gives off the possible heat build-up into the vehicle
The water container of the Trumatic C should be decalcified from time to time. You can use citric acid to do this, which can be
The water container on the Truma Combi heater should be regularly sterilised and descaled. Any standard cleaning products stocked by specialist camping retailers can be
We recommend that you clean the Truma S heater before starting your holiday. Remove the cover from the S heater. Remove the dust that has
Occasional cleaning of the Trumatic S fan wheel is advisable. Clean the blades using a brush with hard bristles or compressed air. The fan should
No. The design of the S 3004 and S 5004 were changed and made more user friendly. Almost all parts were changed. Therefore, you cannot
No. This is not possible due to the different dimensions and connections and is therefore not approved.
Apart from cowl top T-1, you can use the warm air parts and cowls without modification.
No. You cannot retrofit the heating elements in the standard model. In the electric version of the Truma Combi heater, the heating elements are integrated