How much time do I have to connect the Truma iNet Box via Bluetooth?
If Bluetooth pairing is active, you will see the Truma iNet Box on your mobile device for up to two minutes. The blue LED flashes
If Bluetooth pairing is active, you will see the Truma iNet Box on your mobile device for up to two minutes. The blue LED flashes
An indication for correct measurement is a relatively short measuring time of one to two seconds. The Truma LevelCheck then receives a clear signal and
This is a simple and swift process: Open the lid and push it past the stop until the lid can be detached. To attach the
No, the Truma iNet Box does not work with WiFi.
Yes, the Truma App also runs on tablets with iOS and Android. Download the Truma App now from the App Store or Google Play.
Yes. There must be a line of vision between the remote control and the receiver. Transmission is shown on the receiver by a flashing red
The grandfather clause applies only to the vehicle. If your gas pressure regulator or gas hose is more than ten years old, you must replace
No. To use the Truma iNet Box, you need a digital CP plus iNet ready control panel. You recognise such a control panel by the
No, unfortunately that is not possible.
To use the Mover as an anti-theft device, the drive rollers must be driven up to the wheels. There is no problem if the rollers