How do I restart my Truma Mover after self-deactivation?
If the manoeuvring system is not used for an hour, the control unit switches off to conserve the battery. To reactivate the system, it has
If the manoeuvring system is not used for an hour, the control unit switches off to conserve the battery. To reactivate the system, it has
Select the preferred energy type via the corresponding symbol “gas cylinder/arrow”. The symbol is displayed only if you use a Combi heater. In our how-to
In our how-to video “Truma CP plus iNet ready, Section 5 – Fan” we explain in less than three minutes how to set the fan
The video “Truma CP plus iNet ready, Section 3 – Warm water” shows you in just a few seconds how to set the hot water
On Single Zone models, simply press “” and you can then set your desired temperature using the plus and minus keys. You can press the
The three-stage battery discharge protection prevents the vehicle battery from being discharged. To switch it on, press the “” button three times and then select
A set-up wizard in the Truma App explains step-by-step what you have to do (e.g. enter the SIM PIN). The Truma iNet Box has just
To switch on the Bluetooth function, press the “” button four times on Single Zone models and five times on Dual Zone models. You can
With these settings, Truma Aventa will cool your caravan or motor home very quickly: – Fan speed high – Air distribution front/back on middle setting
Attach the Truma LevelCheck horizontally to the gas cylinder at an angle of 90°. The filling level is measured by an ultrasound signal. If liquefied
