How much time do I have to connect the Truma iNet Box via Bluetooth?
If Bluetooth pairing is active, you will see the Truma iNet Box on your mobile device for up to two minutes. The blue LED flashes
If Bluetooth pairing is active, you will see the Truma iNet Box on your mobile device for up to two minutes. The blue LED flashes
The average power consumption of the iNet Box is 40 mA when operating and 20 mA in standby mode. (12 / 24 V)
You can register up to 20 smartphones or tablets to the Bluetooth connection of the Truma iNet Box. Four mobile devices can control the Truma
Truma appliances can be operated via Bluetooth in the vehicle and within close range. The CP plus iNet ready shows all settings on the Truma
DuoControl CS automatically switches over to the second gas cylinder once the operating cylinder is empty. Watch the video to see how it works.
From minute 1:15, the how-to video “Truma CP plus iNet ready, Section 2 – Heating and Cooling” deals with automatic climate control.
This is a simple and swift process: Open the lid and push it past the stop until the lid can be detached. To attach the
No. To use the Truma iNet Box, you need a digital CP plus iNet ready control panel. You recognise such a control panel by the
The grandfather clause applies only to the vehicle. If your gas pressure regulator or gas hose is more than ten years old, you must replace
Yes. There must be a line of vision between the remote control and the receiver. Transmission is shown on the receiver by a flashing red