The Truma iNet Box does not switch off when I press the button – why?
The Truma iNet Box has no on/off switch but a switch can be integrated into the power line.
The Truma iNet Box has no on/off switch but a switch can be integrated into the power line.
In this case, connect your Aventa air conditioner to the TIN-2 slot of the Truma iNet Box.
A set-up wizard in the Truma App explains step-by-step what you have to do (e.g. enter the SIM PIN). The Truma iNet Box has just
MonoControl CS (black) If the crash sensor has been triggered, it can be easily reset. Simply press the yellow reset button on the MonoControl CS
In Germany, the gas system must be inspected every two years by an LPG expert (DVFG, TÜV, DEKRA). This is documented with an inspection certificate
If the manoeuvring system is not used for an hour, the control unit switches off to conserve the battery. To reactivate the system, it has
The three-stage battery discharge protection prevents the vehicle battery from being discharged. To switch it on, press the “” button three times and then select
To switch on the Bluetooth function, press the “” button four times on Single Zone models and five times on Dual Zone models. You can
With these settings, Truma Aventa will cool your caravan or motor home very quickly: – Fan speed high – Air distribution front/back on middle setting
Attach the Truma LevelCheck horizontally to the gas cylinder at an angle of 90°. The filling level is measured by an ultrasound signal. If liquefied
