Can I connect two air conditioners to one iNet X (Pro) panel?
With the iNet X (Pro) panel, one air conditioner can currently be connected. According to the compatibility list , this can be a Truma Aventa roof-mounted
With the iNet X (Pro) panel, one air conditioner can currently be connected. According to the compatibility list , this can be a Truma Aventa roof-mounted
Depending on the operating system, the following steps must be performed: Android: Disconnect the panel via the app (App – Settings – Device manager –
If the iNet X app has not been used for several months or has only been used without internet, the iNet X account is automatically
At present, we cannot offer Truma boilers that are approved for boats. Remember that the approval and warranty become invalid if you install a Truma
No. Approvals for fixed buildings have changed so that Truma water systems cannot be installed in mobile homes. Our appliances are approved for recreational vehicles.
Error 621 appears in the display of the CP plus panel – what should I do? This error is displayed flashing during the first commissioning
Combi E in mixed mode (combined gas and electric heating operation): Warning indicates lack of gas supply. The heater now only runs in electric mode.
Your heater includes a window switch which prevents the heater from starting up if the side window above or right next to wall cowl of
Remedy fault 507 / 516 / 517 (gas supply interrupted) Restore the gas supply, for example by connecting a full gas cylinder. Then confirm or
No. Our current appliances are approved only for recreational vehicles. Therefore, installation in an awning is unfortunately not allowed. But you can retrofit your Truma
