How do I restart my Truma Mover after self-deactivation?
If the manoeuvring system is not used for an hour, the control unit switches off to conserve the battery. To reactivate the system, it has
If the manoeuvring system is not used for an hour, the control unit switches off to conserve the battery. To reactivate the system, it has
MonoControl CS (black) If the crash sensor has been triggered, it can be easily reset. Simply press the yellow reset button on the MonoControl CS
The video “Truma CP plus iNet ready, Section 3 – Warm water” shows you in just a few seconds how to set the hot water
In our how-to video “Truma CP plus iNet ready, Section 5 – Fan” we explain in less than three minutes how to set the fan
Check whether Bluetooth is switched on on your smartphone or tablet. Check that the Truma iNet Box is ready for operation. Check that the devices
Attach the Truma LevelCheck horizontally to the gas cylinder at an angle of 90°. The filling level is measured by an ultrasound signal. If liquefied
With these settings, Truma Aventa will cool your caravan or motor home very quickly: – Fan speed high – Air distribution front/back on middle setting
To switch on the Bluetooth function, press the “” button four times on Single Zone models and five times on Dual Zone models. You can
A set-up wizard in the Truma App explains step-by-step what you have to do (e.g. enter the SIM PIN). The Truma iNet Box has just
The three-stage battery discharge protection prevents the vehicle battery from being discharged. To switch it on, press the “” button three times and then select
