How do I prepare the Truma S heater for the travel season?
We recommend that you clean the Truma S heater before starting your holiday. Remove the cover from the S heater. Remove the dust that has
We recommend that you clean the Truma S heater before starting your holiday. Remove the cover from the S heater. Remove the dust that has
Occasional cleaning of the Trumatic S fan wheel is advisable. Clean the blades using a brush with hard bristles or compressed air. The fan should
This function protects the unit from possible overheating caused by heat build-up. The circulating air motor gives off the possible heat build-up into the vehicle
At least three outlets of the Trumatic C 4002 must be connected to the warm air distribution to prevent the appliance overheating. However, all 4
Mixed mode of your Combi 6 E heater works like this: On the power selector switch you can select mixed mode 1 or 2. Mixed
Combi E in mixed mode (combined gas and electric heating operation): Warning indicates lack of gas supply. The heater now only runs in electric mode.
The heater does not have 12 Volt power supply or there is no connection between the heater and the CP plus control panel. The power
Remedy fault 507 / 516 / 517 (gas supply interrupted) Restore the gas supply, for example by connecting a full gas cylinder. Then confirm or
Error 621 appears in the display of the CP plus panel – what should I do? This error is displayed flashing during the first commissioning
No. For Truma S heaters, however, we recommend that you clean the heat exchanger and the fan wheel fins with a paintbrush or vacuum cleaner
