Which battery do I need to run the Truma Mover?
For operation, we generally recommend electric vehicle or lighting batteries. These can be gel batteries or AGM batteries with round cell technology. For an optimum
For operation, we generally recommend electric vehicle or lighting batteries. These can be gel batteries or AGM batteries with round cell technology. For an optimum
We recommend installation in front of the vehicle’s axle to protect the Truma Mover better from spray water from the caravan wheels. Basically, the Mover
If the distance between the battery and control unit is too small, this can cause signal loss as the battery has a shielding effect.
The plug should only be inserted in the safety socket for manoeuvring. Charging takes place directly between the charger and the battery.
We recommend that you switch off the cut-off switch after manoeuvring. The battery cut-off switch disconnects the battery from the control unit. It ensures that
If you hear an acoustic signal four times and the red warning triangle (LED 3) also flashes when the remote control is switched on, the
If the manoeuvring system is not used for an hour, the control unit switches off to conserve the battery. To reactivate the system, it has
Generally, the Truma Mover manoeuvring system can be installed on most caravans. Please see the respective dimensions in our installation instructions and the installation overview.
The Truma SolarSet 23 in combination with the Mover PowerSet protects the battery of the Truma Mover against deep discharge. The set also maintains the
If you see an oil leak in the transmission when you install your Truma Mover or replace the gearbox unit, this is not a defect.
