How do I fill the Truma electric boiler?
– Check whether the drain valve in the cold water supply is closed: lever horizontal, position (a). – Open the hot water tap in
– Check whether the drain valve in the cold water supply is closed: lever horizontal, position (a). – Open the hot water tap in
Close the drain and aeration valves (4) completely. With premixers Set the control button (2) of the premixer valve all the way to the red
Check the Truma Therme for leaks. If the Therme is leaking, the inside container must be replaced. This can be done by our mobile service
The water in the Truma Therme is heated by the warm air of the heating system or by a 230 V electric heating element.
No. Approvals for fixed buildings have changed so that Truma water systems cannot be installed in mobile homes. Our appliances are approved for recreational vehicles.
The Truma electric boiler can take a long time to heat if the water container is calcified. In this case, decalcify the water container with
The Truma electric boiler cannot be filled if the drain valve is open. Check the drain valve and close it if it is open.
There can be several reasons why the water in your Truma electric boiler does not get hot: Cause Remedy No power. Reconnect the power. Operation
At present, we cannot offer Truma boilers that are approved for boats. Remember that the approval and warranty become invalid if you install a Truma
The Truma Boiler electric should be regularly sterilised and descaled. Any standard cleaning products stocked by specialist camping retailers can be used for cleaning, sterilisation
