What water fitting do I need to connect the electric boiler to my supply lines?
John Guest fittings need to be connected to the electric boiler.
John Guest fittings need to be connected to the electric boiler.
No. The Truma electric boiler is available only with a capacity of 14 litres.
The heat exchangers in the Truma heaters are so solidly built that they do not need to be replaced for 30 years in case of
For hygienic reasons, we recommend that you regularly decalcify and sterilise the entire water system. This can be done with special products from specialised dealers
Due to the high-quality insulation of the electric boiler, the water temperature decreases only 1 °C each hour.
It takes the electric boiler around 70 minutes to heat up 14 litres of water from 15 °C to 60 °C.
Basically yes, as the materials used in the electric boiler – for example stainless steel – have drinking water quality. Maintenance of the drinking water
Yes, because the electric boiler is supplied with a mains water pressure reducing valve, so it can be connected to a mains water supply.
– Check whether the drain valve in the cold water supply is closed: lever horizontal, position (a). – Open the hot water tap in
