Among the manoeuvring systems, Mover XT4 is the powerhouse for heavyweights. It is especially suitable for large, heavy twin-axle caravans weighing up to 3100 kilograms. The highly efficient motors require very little battery capacity: a 55 Ah Optima battery is sufficient for the Mover XT4. The brushless motors are also very light.
Technical Details
With Mover XT4 you can manoeuvre twin-axle caravans to their parking spot safely and accurately.
Use the slide control on the remote control to accelerate smoothly and the control knob to steer.
The design concept, degree of innovation and functionality of the Mover XT4 were acknowledged with the Red Dot Design Award.
The German Design Award Special Mention 2015 recognises the special design quality of the Truma manoeuvring system
Accurate parking in any space and in tight corners.
No rolling back or sliding: holds securely on upward and downward inclines up to 25%.
Manoeuvre safely on any surface: snow, gravel, grass or sand – can be used in any terrain.
Manoeuvre effortlessly – with the convenient radio remote control
Durable and almost maintenance free: the sturdy housing protects the motor and gears from spray water and dirt.
Start the vehicle with no jolts and couple accurately thanks to the precise positioning of the caravan.
Among the manoeuvring systems, Mover XT4 is the powerhouse for heavyweights. It is especially suitable for large, heavy twin-axle caravans weighing up to 3100 kilograms. The highly efficient motors require very little battery capacity: a 55 Ah Optima battery is sufficient for the Mover XT4. The brushless motors are also very light.
Swivel the drive rollers on and off easily at the push of a button. Then use the remote control to manoeuvre your caravan precisely, safely and smoothly even in tight spaces. If you operate the slide control and control knob at the same time, the Mover XT4 moves in a circle, the radius is just 10.8 metres and it takes just 90 seconds to rotate the caravan. Because of its two axles, the caravan cannot be rotated around its own axis.
Truma Dynamic Move Technology – continuous comparison of the target and actual speed of the motors – ensures maximum manoeuvring precision and eXTreme directional stability also in Mover XT4. The system easily handles obstacles on one side and uneven surfaces.
In connection with the manufacturer’s warranty of two years, the Truma Partner grants a parts warranty to air conditioning systems and Mover from Truma (“the product”) for an additional three years, so for years 3, 4 and 5 from the date of purchase, under the following conditions.
Our guide will help you find the right caravan mover.
No results found.
Can a Truma Mover be used as an anti-theft device?
To use the Mover as an anti-theft device, the drive rollers must be driven up to the wheels. There is no problem if the rollers are under pressure for a short time. However, we do not recommend this as a long-term measure. In this case, the permanent imprint of the drive rollers on the tyres would deform and damage them.
Which battery do I need to run the Truma Mover?
For operation, we generally recommend electric vehicle or lighting batteries. These can be gel batteries or AGM batteries with round cell technology.
For an optimum power supply, we offer the Mover PowerSet.
The Truma Mover PowerSet consists of optimally coordinated top products which ensure that your Mover will provide its full power for up to 50% longer.
Truma recommends the high-performance Optima batteries for which a specially adapted charging curve is available with the BC 10 charger.
How do I know whether I can install the Truma Mover on my caravan?
Generally, the Truma Mover manoeuvring system can be installed on most caravans.
Parts waranty for air conditioning systems and Mover from the manufacturer Truma
Warrantor and warranty period
In connection with the manufacturer’s warranty of two years, the Truma Partner grants a parts warranty to air conditioning systems and Mover from Truma (“the product”) for an additional three years, so for years 3, 4 and 5 from the date of purchase, under the following conditions.
The warrantor is the Truma Partner, from whom the respective product was acquired and professionally installed.
If repair work is undertaken within the scope of the warranty, the warranty period with regard to the repaired or replaced parts does not re-commence, but the original warranty period continues.
Warranty requirements and extent of the warranty
The parts warranty applies to product defects, which can be attributed to material or production faults.
A claim can only be made in relation to this part warranty upon submission of this certificate, the original receipt and specification of the serial number for the product, for which this warranty claim shall be lodged.
Spare parts costs are covered by this warranty. Costs are not covered for installation and removal, dismantling of furniture or body parts as well as transport and road costs, travel expense or other costs, which are not spare parts costs.
The Truma Partner shall decide on the type of repair.
Replaced (spare) parts shall become the property of the warrantor.
Exceptions
The warranty does not provide cover:
parts and their installation, in particular changes to the exhaust gas system or to the cowl by the end customer or third parties.
Miscellaneous
Further claims, in particular claims for damages by the end customer or a third party are ex- cluded.
Contractual or legal claims of the end customer against the Truma Partner, such as warranty claims or claims for damages are not affected by this parts warranty.
The provisions of the Product Liability Act remain unaffected by this.