What is the calibration function in the Truma App good for while levelling?
The sensors in smartphones and tablets can become unaligned over time. The calibration in the Truma App realigns the sensors. You need a horizontal surface
The sensors in smartphones and tablets can become unaligned over time. The calibration in the Truma App realigns the sensors. You need a horizontal surface
The Truma App needs iOS 11 or Android 6.0 or higher. The Truma App does run on smartphones with older operating systems, but possibly not
Please check the following in this order: 1. Is the green LED on the Truma iNet Box lit or flashing? If not, you have to
In this case, connect your Aventa air conditioner to the TIN-2 slot of the Truma iNet Box.
If the first air conditioner is already connected to TIN 1, disconnect the power supply from it. Now you can connect the second air conditioner
No, the settings are stored permanently in the CP plus iNet ready. You only have to reset the time and the timer.
If you have a grey Combi heater in your vehicle, the PCB must be replaced and the digital CP plus iNet ready control panel must
Perhaps you entered the wrong phone number for the iNet Box in the Truma App set-up wizard. To check this, copy the iNet Box phone
The default setting of the digital CP plus iNet ready control panel is configured so that the automatic climate control, ACC is “OFF” in the
The Truma iNet Box has no on/off switch but a switch can be integrated into the power line.
