End-of-season maintenance is an important part of keeping your RV and its systems in good working order. A key step in preparing your RV for a long winter is winterizing your Truma AquaGo instant water heater. The Truma AquaGo can be fully winterized without any chemicals or special tools, thanks to our Easy Drain Lever.
Step 1: Turn off your Truma AquaGo and allow the unit to cool completely.
Step 2: Depressurize the Truma AquaGo by turning off the pump or incoming water supply and opening all hot and cold water fixtures.
Step 3: The unit should be placed in „Bypass“ mode in accordance with the manufacturer’s instructions.
Step 4: Release the yellow „Easy Drain Lever“ to empty the mixing vessel.
Step 5: Swing the yellow lever down as far as possible to eject the filter cartridge, allowing the water to drain completely.
Step 6: We recommend storing the filter cartridge separately while the system is winterized.
Your Truma AquaGo is now winterized!
We do not recommend the use of high-pressure air or antifreeze solutions when winterizing the Truma AquaGo. Antifreeze fluid should only be used with an installed bypass kit; refer to the complete manufacturer‘s manual for more details.
Other Maintenance
We recommend decalcifying your Truma AquaGo annually. Make this a part of your end-of-season checklist with easy-to-use Truma AquaGo Decalcification Tablets.
If you plan on traveling in the winter months, we recommend purchasing a Truma AquaGo Electric Antifreeze Kit to keep your Truma AquaGo frost-free, even in standby mode, without using propane.
Need More Help?
Watch our step-by-step winterization tutorial
Our Customer Care team is happy to answer any questions, just call 1-855-558-7862 ext. 1 to speak with a representative.
