Truma iNet Set

The easy way to app control

The Truma iNet Set consists of the Truma iNet Box and the CP plus iNet ready digital control panel. Both of these are required in order to control a Combi heater using the smartphone app. This makes the set perfect if you have a Combi heater with analogue control panel or non-iNet-compatible CP plus.

All you need to do is replace the control panel and fit the iNet Box in your caravan or motor home. If you have a Combi heater produced before 2013, you also need to replace the heater electronics.

Once you have joined the iNet world with the Truma iNet Set, you can conveniently control your Combi heater via the app. Further functions are available when combined with an iNet-compatible air conditioner.

  • Control iNet-compatible heaters and air conditioners with the app
  • Use the automatic climate control with the app
  • Set heat and cold alarms
  • Check the vehicle status while you’re on the go
     

More details about Truma iNet Set

Alongside the heater and air conditioner, you can integrate other devices into the iNet System like the LevelControl. This device uses ultrasound to measure the gas level, before communicating it to the Truma App. You can therefore see at a glance how much gas you have left and can change the cylinder in time.

Find out more about the iNet System and its components.
 

Truma Partner

Services provided by Truma Partners

  • Extended parts warranty for selected products
  • Exclusive range of products
  • Expert advice

Find your nearest Truma Partner

Accessories for the iNet Set

Surface-mounted frame CP plus

For installation of the digital CP plus iNet ready control panel in caravans or motor homes, if the control panel cannot be flush mounted in the wall.
 

Surface-mounted frame CP plus

For installation of the digital CP plus iNet ready control panel in caravans or motor homes, if the control panel cannot be flush mounted in the wall.

TIN distributor

This allows two appliances to be connected to the digital CP plus iNet ready control panel – such as a Truma Combi heater and an iNet Box.
 

TIN distributor for digital CP plus control panel

This allows two appliances to be connected to the digital CP plus iNet ready control panel – such as a Truma Combi heater and an iNet Box.
 

  • Message
  • Service Centres
  • Dealer search

If you require information about Truma Service Centres in the UK, please contact Truma UK on:

Contact
Phone: 01283 587960
E-mail: technical@trumauk.com

Service times
Monday – Friday 8.30 a.m. – 5.30 p.m.
Weekends and bank holidays: Closed

If you have a question about an appliance, always have information about the appliance type, year of manufacture and factory number at hand. You'll find this on the type plate on the appliance.

Truma type plate

Find your nearest Truma Dealer.

We use cookies to ensure optimum design and continuous improvement of our website. By using the website, you agree to the use of cookies. Accept More information