Man using a remote control of a caravan mover

Mover XT4

Manoeuvring system for twin-axle caravans up to 3100 kilograms

Truma Mover XT

Among the manoeuvring systems, Mover XT4 is the powerhouse for heavyweights. It is especially suitable for large, heavy twin-axle caravans weighing up to 3100 kilograms. The highly efficient motors require very little battery capacity: a 55 Ah Optima battery is sufficient for the Mover XT4. The brushless motors are also very light.

  • 100 per cent directional stability – on any surface
  • Automatic stop function and roll-back block for your safety
  • Easy to steer with the remote control
  • At just 60 kilograms, it is the lightest manoeuvring system in its class
Truma Mover XT
With Mover XT4 you can manoeuvre twin-axle caravans to their parking spot safely and accurately.
Truma Mover XT remote control
Use the slide control on the remote control to accelerate smoothly and the control knob to steer.
Reddot design award 2014 logo
The design concept, degree of innovation and functionality of the Mover XT4 were acknowledged with the Red Dot Design Award.
German design award 2015 logo
The German Design Award Special Mention 2015 recognises the special design quality of the Truma manoeuvring system.

More details about Mover XT4

Swivel the drive rollers on and off easily at the push of a button. Then use the remote control to manoeuvre your caravan precisely, safely and smoothly even in tight spaces. If you operate the slide control and control knob at the same time, the Mover XT4 moves in a circle, the radius is just 10.8 metres and it takes just 90 seconds to rotate the caravan. Because of its two axles, the caravan cannot be rotated around its own axis.

Truma Dynamic Move Technology – continuous comparison of the target and actual speed of the motors – ensures maximum manoeuvring precision and eXTreme directional stability also in Mover XT4. The system easily handles obstacles on one side and uneven surfaces.

  • Handles inclines of up to ten per cent and normal levelling ramps (short-term loads)
  • Smooth steering and acceleration thanks to Truma Dynamic Move Technology
  • Extremely accurate manoeuvring
  • Powerful, brushless DC motors
  • Compact, lightweight design so that you can carry more in your caravan

Caravan in the mountains
Mover XT – eXTremely superior: watch the video and see just how the Mover XT works.
Howie explaining the emergency disengagement of the Mover XT
Watch the video and see how the emergency disengagement function of the
Mover XT works.
Man couples caravan with a mover on a car
Watch the video of the Mover XT4 – the powerhouse for heavyweights.
Man moving a caravan with a mover into a garage
Accurate parking in any space and in tight corners.
Woman with a dog moving a caravan
No rolling back or sliding: holds securely on upward and downward inclines up to 25%.
Caravan tyre on gravel
Manoeuvre safely on any surface: snow, gravel, grass or sand – can be used in any terrain.
Man using a remote control of a caravan mover
Manoeuvre effortlessly – with the convenient radio remote control.
Truma Mover XT with cravan tyre
Durable and almost maintenance free: the sturdy housing protects the motor and gears from spray water and dirt.
Man couples caravan with a mover on a car
Start the vehicle with no jolts and couple accurately thanks to the precise positioning of the caravan.

Truma Partner

Services provided by Truma Partners

  • Extended parts warranty for selected products
  • Exclusive range of products
  • Expert advice

Find your nearest Truma Partner

Replace comparison appliance Add for comparison Back

Compare Truma manoeuvring systems for twin-axle caravans

Mover XT4

Electric swivelling manoeuvring system with four motors for twin-axle caravans up to 3100 kilograms.

Permitted total weight 3100 kg
Trailer type Twin axle
Operating voltage 12 V DC
Average power consumption on even ground at a total weight of approx. 37 A
Maximum power consumption 150 A
Quiescent current consumption < 80 mA (plug / adapter plugged in) < 0,15 mA (plug/adapter not plugged in or after 1 hour withplug / adapter plugged in)
Speed (depending on weight and incline) approx. 17 cm per second
Swivelling in/out electrical
Remote control for manoeuvring included
Radio frequency Class 2.868 MHz
Max. climbing capacity 10% with 3100 kg
Weight approx. 60 kg

Mover XT2

Electric swivelling manoeuvring system with two motors for twin-axle caravans up to 2400 kilograms.

Permitted total weight 2400 kg
Trailer type Twin axle
Operating voltage 12 V DC
Average power consumption on even ground at a total weight of approx. 28 A
Maximum power consumption 150 A
Quiescent current consumption < 80 mA (plug / adapter plugged in) < 0.15 mA (plug / adapter not plugged in)
Speed (depending on weight and incline) approx. 17 cm per second
Swivelling in/out electrical
Remote control for manoeuvring included
Radio frequency Class 2.868 MHz
Max. climbing capacity 10% with 2400 kg
Weight approx. 28 kg

Mover XT

Electric swivelling manoeuvring system with two motors for single-axle caravans up to 2300 kilograms.

Permitted total weight 2300 kg
Trailer type Single axle
Operating voltage 12 V DC
Average power consumption on even ground at a total weight of approx. 28 A
Maximum power consumption 150 A
Quiescent current consumption < 80 mA (plug/adapter plugged in) < 0.15 mA (plug/adapter not plugged in)
Speed (depending on weight and incline) approx. 17 cm per second
Swivelling in/out electrical
Remote control for manoeuvring included
Radio frequency Class 2, 868 MHz
Max. climbing capacity 13% with 2300 kg
Weight approx. 28 kg

Mover XT L

Electric swivelling manoeuvring system with two motors for single-axle caravans up to 1500 kilograms.

Permitted total weight 1500 kg
Trailer type Single axle
Operating voltage 12 V DC
Average power consumption on even ground at a total weight of approx. 28 A
Maximum power consumption 150 A
Quiescent current consumption < 80 mA (plug/adapter plugged in) < 0,15 mA (plug/adapter not plugged in)
Speed (depending on weight and incline) approx. 17 cm per second
Swivelling in/out electrical
Remote control for manoeuvring included
Radio frequency Class 2, 868 MHz
Max. climbing capacity 20 % with 1500 kg, 25 % with 1200 kg
Weight approx. 28 kg

Accessories for Mover XT4

Find suitable accessories for your Mover XT4 – from Mover PowerSet to suitable installation brackets.

Adapter kit AL-KO M short to 1800 kg

For AL-KO frames with offset axle and a permitted total weight of up to 1800 kg.

Adapter kit AL-KO M short to 1800 kg

For AL-KO frames with offset axle and a permitted total weight of up to 1800 kg. For frame edge compensation when the frame is pushed together as far as possible.

Also suitable for

  • Mover SR
  • Mover SE
  • Mover SE R

Mover PowerSet

Together with the suitable battery, provides the power for the Mover. Consists of the charger BC 10, terminal clamps, temperature sensor and battery cut-off switch. 

Mover PowerSet with charger BC 10

Together with the suitable battery, provides the power for the Mover. Consists of the charger BC 10, terminal clamps, temperature sensor and battery cut-off switch.

  • Charger can be removed in one action thanks to the plug-and-play connection
  • Charges all 12 V lead acid batteries
  • Optimised charging curve for each battery type
  • Current charge status can be seen on LED display 

Battery cut-off switch

Interrupts the circuit and prevents the risk of short circuits. Is connected to the positive pole of the battery. Also useful as an additional anti-theft device.  

Battery cut-off switch for more safety

Interrupts the circuit and prevents the risk of short circuits. Is connected to the positive pole of the battery. Also useful as an additional anti-theft device.

Also suitable for

  • Mover S
  • Mover SR
  • Mover SE
  • Mover SE R
  • Mover TE
  • Mover TE R
  • Mover TE R4 

Easy clicK terminal clamps

Connect and disconnect battery connections quickly and easily by hand. Suitable for all DIN and SAE connections. Suitable for currents up to 150 A at continuous load, 800 A at short-term load. 

Easy clicK terminal clamps for the battery

 Connect and disconnect battery connections quickly and easily by hand. Suitable for all DIN and SAE connections. Suitable for currents up to 150 A at continuous load, 800 A at short-term load.

Also suitable for

  • Mover S
  • Mover SR
  • Mover SE
  • Mover SE R
  • Mover TE
  • Mover TE R
  • Mover TE R4

Low chassis kit, short

To balance out the height of caravans with a frame height less than 80 mm (all Mover XTs) or less than 110 mm (Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV).

Low chassis kit, short for height adjustment

To balance out the height of caravans with a frame height less than 80 mm (all Mover XTs) or less than 110 mm (Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV).

Also suitable for

  • Mover S
  • Mover SR
  • Mover SE
  • Mover SE R
  • Mover TE
  • Mover TE R
  • Mover TE R4

 

Low chassis kit

To balance out the height of caravans with a frame height less than 80 mm (all Mover XT) or less than 110 mm ( Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV).

Low chassis kit for height adjustment

To balance out the height of caravans with a frame height less than 80 mm (all Mover XT) or less than 110 mm ( Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV).

Also suitable for

  • Mover S
  • Mover SR
  • Mover SE
  • Mover SE R
  • Mover TE
  • Mover TE R
  • Mover TE R4 

 

Mover spacer kit 60 mm

To balance out the height of caravans with a frame height of < 140 to 80 mm. Suitable for Mover systems built after 05/12. 

Mover spacer kit 60 mm for height adjustment

To balance out the height of caravans with a frame height of < 140 to 80 mm. Suitable for Mover systems built after 05/12. 

Mover spacer kit 30 mm

To balance out the height of caravans with a frame height of < 170 to 110 mm. Suitable for Mover systems built after 05/12. 

Mover spacer kit 30 mm for height adjustment

To balance out the height of caravans with a frame height of < 170 to 110 mm. Suitable for Mover systems built after 05/12. 

Short mounting system

Alternative mounting if the Mover cannot be attached because of substructures or interfering edges. In Germany, a test certificate (TÜV) is required, apart from Mover XT and Mover SX.

Short mounting system

Alternative mounting if the Mover cannot be attached because of substructures or interfering edges. In Germany, a test certificate (TÜV) is required, apart from Mover XT and Mover SX. 

Also suitable for

  • Mover SE R
  • Mover TE R
  • Mover TE R4 (2 pieces)

 

Mover mudflap kit

Is used when the original mudflaps no longer fit after installation of the Mover behind the axle. Including instructions and template to adapt mudflaps. 

Mudflap kit for Mover manoeuvring systems

Is used when the original mudflaps no longer fit after installation of the Mover behind the axle. Including instructions and template to adapt mudflaps. 

  • Message
  • Service Centres
  • Dealer search

If you require information about Truma Service Centres in the UK, please contact Truma UK on:

Contact
Phone: 01283 587960
E-mail: technical@trumauk.com

Service times
Monday – Friday 8.30 a.m. – 5.30 p.m.
Weekends and bank holidays: Closed

If you have a question about an appliance, always have information about the appliance type, year of manufacture and factory number at hand. You'll find this on the type plate on the appliance.

Truma type plate

Find your nearest Truma Dealer.

We use cookies to ensure optimum design and continuous improvement of our website. By using the website, you agree to the use of cookies. Accept More information