Mover XT2

Truma Mover XT

Manoeuvring system for twin-axle caravans up to 2400 kilograms

  • 100 per cent directional stability and ultimate precision – also on uneven surfaces

  • Extremely reliable and safe

  • Intuitive steering with the remote control

  • Maximum weight advantage of 20 kilograms thanks to highly efficient high-tech motors

Product details Product specifications FAQs and downloads
Product details Product specifications FAQs and downloads

More details about the Mover XT2 manoeuvring system

Mover XT2 effortlessly moves twin-axle caravans weighing up to 2400 kilograms. With the manoeuvring system, move your caravan to its position without any effort. With the control knob and slide control on the remote control you can steer and accelerate smoothly and in all directions without any jolts – thanks to time-tested Truma Dynamic Move Technology.

The Mover XT2 manoeuvring system has especially powerful motors that need very little battery capacity: with the Truma PowerSet light and an Optima battery, you can move your caravan for more than one hour – until it is in the optimum position. The brushless motors are also very light. The device and battery together save up to 20 kilograms.

You can move your caravan in a circle in just over two minutes, the radius is 17.5 metres. Because of its two axles, the caravan cannot be rotated around its own axis.

  • Handles inclines of up to ten per cent and normal levelling ramps (short-term loads)
  • Exact manoeuvring to the desired position
  • Precise coupling to the towing vehicle
  • Drive rollers are swivelled in and out at the push of a button
  • For twin-axle caravans up to 2400 kilograms
FAQs
Downloads
Videos
{{filteredFaqs.length}} FAQ
{{filteredFaqs.length}} FAQs
{{amountDownloads}} Download
{{amountDownloads}} Downloads
{{downloadGroup.title}}
{{download.doctyp.name}}  ({{download.lang}})
{{download.title}} {{download.desc}}
{{download.date}}
{{filteredVideos.length}} video videos

{{video.title}}

The video was not found.

Accessories

Find suitable accessories.
Mud guard set for Mover manoeuvring systems Is used when the original mudflaps no longer fit after installation of the Mover behind the axle. Including instructions and template to adapt mud guards.
Low chassis kit for height adjustment Low chassis kit for height adjustment To balance out the height of caravans with a frame height less than 80 mm (all Mover XT) or less than 110 mm ( Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV).
Mover spacer set 30 mm for height adjustment To balance out the height of caravans with a frame height of < 170 to 110 mm. Suitable for Mover systems built after 05/12.
Mover PowerSet with charger BC 10 Together with the suitable battery, provides the power for the Mover. Consists of the charger BC 10, terminal clamps, temperature sensor and battery cut-off switch.
Low chassis kit short for height adjustment To balance out the height of caravans with a frame height less than 80 mm (all Mover XTs) or less than 110 mm (Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV).
Mover spacer set 60 mm for height adjustment To balance out the height of caravans with a frame height of < 140 to 80 mm. Suitable for Mover systems built after 05/12.
Adapter kit for AL-KO M frame to 1800 kg To balance out frame edges for caravans with AL-KO M chassis with axial movement to 1800 kg maximum permitted weight.
Battery cut-off switch for more safety Interrupts the circuit and prevents the risk of short circuits. Is connected to the positive pole of the battery. Also useful as an additional anti-theft device.
Short mounting system Alternative mounting if the Mover cannot be attached because of substructures or interfering edges. In Germany, a test certificate (TÜV) is required, apart from Mover XT and Mover SX.
Easy clicK terminal clamps for the battery Connect and disconnect battery connections quickly and easily by hand. Suitable for all DIN and SAE connections. Suitable for currents up to 150 A at continuous load, 800 A at short-term load. Also suitable for Mover S Mover SR Mover SE Mover SE R Mover TE Mover TE R Mover TE R4