Truma iNet Set

The easy way to app control

The Truma iNet Set consists of the Truma iNet Box and the CP plus iNet ready digital control panel. Both of these are required in order to control a Combi heater using the smartphone app. This makes the set perfect if you have a Combi heater with analogue control panel or non-iNet-compatible CP plus.

All you need to do is replace the control panel and fit the iNet Box in your caravan or motor home. If you have a Combi heater produced before 2013, you also need to replace the heater electronics.

Once you have joined the iNet world with the Truma iNet Set, you can conveniently control your Combi heater via the app. Further functions are available when combined with an iNet-compatible air conditioner.

  • Control iNet-compatible heaters and air conditioners with the app
  • Use the automatic climate control with the app
  • Set heat and cold alarms
  • Check the vehicle status while you’re on the go
     

More details about Truma iNet Set

Alongside the heater and air conditioner, you can integrate other devices into the iNet System like the LevelControl. This device uses ultrasound to measure the gas level, before communicating it to the Truma App. You can therefore see at a glance how much gas you have left and can change the cylinder in time.
 

Find out more about the iNet System and its components.
 

Truma Dealer

Services provided by Truma Dealers

  • Extensive range of Truma products
  • Expert advice

Find your nearest Truma Dealer

Accessories for the iNet Set

Surface-mounted frame CP plus

For installation of the digital CP plus iNet ready control panel in caravans or motor homes, if the control panel cannot be flush mounted in the wall.
 

Surface-mounted frame CP plus

For installation of the digital CP plus iNet ready control panel in caravans or motor homes, if the control panel cannot be flush mounted in the wall.

TIN distributor

This allows two appliances to be connected to the digital CP plus iNet ready control panel – such as a Truma Combi heater and an iNet Box.
 

TIN distributor for digital CP plus control panel

This allows two appliances to be connected to the digital CP plus iNet ready control panel – such as a Truma Combi heater and an iNet Box.
 

  • Message
  • Service Helpline
  • Service Centre
  • Dealer search

One number for all cases:

+49 (0) 89 4617-2020

Do you have a question about a product, would you like to arrange an appointment with a Truma Service technician or do you need assistance? Just call us.

Service times:
Monday to Friday from 8 a.m. to 6 p.m.

Truma Service can be contacted in the following ways over the Christmas period:

24 to 26 Dec. 2018 and 29 and 31 Dec. 2018 from 8 a.m. to 2 p.m. (emergency service).
27 and 28 Dec. 2018 from 8 a.m. to 6 p.m.
Truma Service is not available on 1 Jan. 2019. Normal hours resume from 2 Jan. 2019 onwards: Monday to Friday from 8 a.m. to 6 p.m.

If you have a question about an appliance, always have information about the appliance type, year of manufacture and factory number at hand. You'll find this on the type plate on the appliance.

Truma type plate

Visit Truma in Putzbrunn.

Service directly from the manufacturer: The Truma Service workshop is located in Putzbrunn, near Munich, Germany. Our staff are very familiar with all Truma products – especially if things get tricky. A journey that’s always worth the effort.

Service times

May to September
Monday – Thursday: 7:30 a.m. – 4:30 p.m.
Friday: 7:30 a.m. – 3 p.m.

October to April
Monday – Thursday: 7:30 a.m. – 4:30 p.m.
Friday: 7:30 a.m. – 4 p.m.

To arrange an appointment, call

+49 (0) 89 4617-2020


Truma Servicewerkstatt
Michael-Haslbeck-Straße 13
85640 Putzbrunn, Germany

Find your nearest Truma Dealer.

We use cookies to ensure optimum design and continuous improvement of our website. By using the website, you agree to the use of cookies. Accept More information