100 per cent directional stability – on any surface
Automatic stop function and roll-back block for your safety
Easy to steer with the remote control
At just 60 kilograms, it is the lightest manoeuvring system in its class
5-year parts warranty when retrofitted by an authorised Truma dealer
Among the manoeuvring systems, Mover XT4 is the powerhouse for heavyweights. It is especially suitable for large, heavy twin-axle caravans weighing up to 3100 kilograms. The highly efficient motors require very little battery capacity: a 55 Ah Optima battery is sufficient for the Mover XT4. The brushless motors are also very light.
Swivel the drive rollers on and off easily at the push of a button. Then use the remote control to manoeuvre your caravan precisely, safely and smoothly even in tight spaces. If you operate the slide control and control knob at the same time, the Mover XT4 moves in a circle, the radius is just 10.8 metres and it takes just 90 seconds to rotate the caravan. Because of its two axles, the caravan cannot be rotated around its own axis.
Truma Dynamic Move Technology – continuous comparison of the target and actual speed of the motors – ensures maximum manoeuvring precision and eXTreme directional stability also in Mover XT4. The system easily handles obstacles on one side and uneven surfaces.
In connection with the manufacturer’s warranty of two years, the Truma Partner grants a parts warranty to air conditioning systems and Mover from Truma (“the product”) for an additional three years, so for years 3, 4 and 5 from the date of purchase, under the following conditions.
{{video.title}}
The video was not found.
Short mounting system | Alternative mounting if the Mover cannot be attached because of substructures or interfering edges. In Germany, a test certificate (TÜV) is required, apart from Mover XT and Mover SX. | |
---|---|---|
Adapter kit for AL-KO M to 1800 kg | To balance out frame edges for caravans with AL-KO M chassis with axial movement to 1800 kg maximum permitted weight. | |
Battery cut-off switch for more safety | Interrupts the circuit and prevents the risk of short circuits. Is connected to the positive pole of the battery. Also useful as an additional anti-theft device. | |
Mover spacer set 60 mm for height adjustment | To balance out the height of caravans with a frame height of < 140 to 80 mm. Suitable for Mover systems built after 05/12. | |
Mover PowerSet with charger BC 10 | Together with the suitable battery, provides the power for the Mover. Consists of the charger BC 10, terminal clamps, temperature sensor and battery cut-off switch. | |
Easy clicK terminal clamps for the battery | Connect and disconnect battery connections quickly and easily by hand. Suitable for all DIN and SAE connections. Suitable for currents up to 150 A at continuous load, 800 A at short-term load. | |
Low chassis kit short for height adjustment | To balance out the height of caravans with a frame height less than 80 mm (all Mover XTs) or less than 110 mm (Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV). | |
Low chassis kit for height adjustment | To balance out the height of caravans with a frame height less than 80 mm (all Mover XT) or less than 110 mm ( Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV). | |
Mover spacer set 30 mm for height adjustment | To balance out the height of caravans with a frame height of < 170 to 110 mm. Suitable for Mover systems built after 05/12. | |
Mud guard set for Mover manoeuvring systems | Is used when the original mudflaps no longer fit after installation of the Mover behind the axle. Including instructions and template to adapt mud guards. |