Ultimate precision and 100 per cent directional stability
Extremely reliable and safe
Smooth acceleration thanks to Truma Dynamic Move Technology
Maximum weight advantage of 20 kilograms
With Mover XT L, you steer your caravan accurately, smoothly and safely to the desired site. Naturally, also around corners and bends. The manoeuvring assistant has the same compact, user friendly features as the Mover XT. The drive rollers can be automatically engaged and disengaged on the wheels by remote control.
Mover XT L effortlessly manoeuvres your caravan around bends and through narrow passages. Thanks to its powerful motors, the manoeuvring assistant also reliably copes with inclines. Brushless motors ensure powerful, efficient operation. The highlight: they are especially light and save weight.
The remote control is handy and easy to operate. Use the control knob to manoeuvre your caravan smoothly to the desired position. Accurate, precise manoeuvring is especially useful when you connect your caravan to the towing vehicle. You can even rotate your caravan around its own axis in less than one minute.
In connection with the manufacturer’s warranty of two years, the Truma Partner grants a parts warranty to air conditioning systems and Mover from Truma (“the product”) for an additional three years, so for years 3, 4 and 5 from the date of purchase, under the following conditions.
{{video.title}}
The video was not found.
Mover spacer set 30 mm for height adjustment | To balance out the height of caravans with a frame height of < 170 to 110 mm. Suitable for Mover systems built after 05/12. | |
---|---|---|
Battery cut-off switch for more safety | Interrupts the circuit and prevents the risk of short circuits. Is connected to the positive pole of the battery. Also useful as an additional anti-theft device. | |
Short mounting system | Alternative mounting if the Mover cannot be attached because of substructures or interfering edges. In Germany, a test certificate (TÜV) is required, apart from Mover XT and Mover SX. | |
Adapter kit AL-KO Vario III / AV | Metal plates reinforce the frame and must be used for installation of the Mover on caravans with AL-KO Vario III / AV Single Chassis with a frame thickness of less than 2.8 mm. | |
Adapter kit for AL-KO M frame 1900 – 2000 kg | To balance out frame edges for the single-axle chassis AL-KO chassis M with continuous frame and a maximum permitted weight of 1900 kg to 2000 kg. | |
Adapter kit for AL-KO M to 1800 kg | To balance out frame edges for caravans with AL-KO M chassis with axial movement to 1800 kg maximum permitted weight. | |
Low chassis kit for height adjustment | To balance out the height of caravans with a frame height less than 80 mm (all Mover XT) or less than 110 mm ( Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV). | |
Low chassis kit short for height adjustment | To balance out the height of caravans with a frame height less than 80 mm (all Mover XTs) or less than 110 mm (Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV). | |
Easy clicK terminal clamps for the battery | Connect and disconnect battery connections quickly and easily by hand. Suitable for all DIN and SAE connections. Suitable for currents up to 150 A at continuous load, 800 A at short-term load. | |
Mover adapter kit Eriba Touring | Enables installation of a Mover on a chassis with a rectangular profile, such as the single-axle Eriba Touring caravan. | |
Mover spacer set 60 mm for height adjustment | To balance out the height of caravans with a frame height of < 140 to 80 mm. Suitable for Mover systems built after 05/12. | |
Mover PowerSet with charger BC 10 | Together with the suitable battery, provides the power for the Mover. Consists of the charger BC 10, terminal clamps, temperature sensor and battery cut-off switch. | |
Mud guard set for Mover manoeuvring systems | Is used when the original mudflaps no longer fit after installation of the Mover behind the axle. Including instructions and template to adapt mud guards. | |
Mover adapter kit Eriba Troll | Allows the installation of the Mover behind the axle of an Eriba Troll caravan. |