Mover smart M

Manoeuvring assistant with manual engagement and disengagement for single-axle caravans

  • Manual engagement and disengagement with a lever movement from one side – no cranking required

  • Start off smoothly, stop with precision

  • Manoeuvre with ease using the handy remote control

  • Simple installation on all common frames

  • No TÜV-registration required thanks to general operating permit

Product details Product specifications FAQs & Downloads
Product details Product specifications FAQs & Downloads

M for manual: The Mover smart M

The Truma Mover smart M is the semi-automatic entry-level model among the Truma manoeuvring assistants. It impresses with its unbeatable price/performance ratio and highest Truma quality. The drive rollers are engaged on the tyres by hand with just one lever movement – and you're already good to go!

With the remote control, you can control your caravan intuitively at the push of a button. Thanks to the soft-start function, the caravan starts off without jerking, and only then is the speed increased. As soon as you release the control knobs, the caravan's brakes are applied. This guarantees maximum safety.


What the Mover smart M can do:

  • Copes with inclines of 13 percent
  • Simple, accurate coupling to the towing vehicle
  • Suitable for single-axle caravans up to 1800 kilograms

The non-slip surface of the drive rollers ensures the required grip on the tyre and enables optimal power transmission. The rollers are particularly low-wearing yet also light – made possible by the use of cast aluminium.

FAQs
Downloads
Videos
{{filteredFaqs.length}} FAQ
{{filteredFaqs.length}} FAQs
{{amountDownloads}} Download
{{amountDownloads}} Downloads
{{downloadGroup.title}}
{{download.doctyp.name}}  ({{download.lang}})
{{download.title}} {{download.desc}}
{{download.date}}
{{filteredVideos.length}} video videos

{{video.title}}

The video was not found.

Accessories

Find suitable accessories.
Mud guard set for Mover manoeuvring systems Is used when the original mudflaps no longer fit after installation of the Mover behind the axle. Including instructions and template to adapt mud guards.
Mover PowerSet with charger BC 10 Together with the suitable battery, provides the power for the Mover. Consists of the charger BC 10, terminal clamps, temperature sensor and battery cut-off switch.
Low chassis kit short for height adjustment To balance out the height of caravans with a frame height less than 80 mm (all Mover XTs) or less than 110 mm (Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV).
Adapter kit for AL-KO M to 1800 kg To balance out frame edges for caravans with AL-KO M chassis with axial movement to 1800 kg maximum permitted weight.
Battery cut-off switch for more safety Interrupts the circuit and prevents the risk of short circuits. Is connected to the positive pole of the battery. Also useful as an additional anti-theft device.
Low chassis kit for height adjustment To balance out the height of caravans with a frame height less than 80 mm (all Mover XT) or less than 110 mm ( Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV).
Short mounting system Alternative mounting if the Mover cannot be attached because of substructures or interfering edges. In Germany, a test certificate (TÜV) is required, apart from Mover XT and Mover SX.
Adapter kit AL-KO Vario III / AV Metal plates reinforce the frame and must be used for installation of the Mover on caravans with AL-KO Vario III / AV Single Chassis with a frame thickness of less than 2.8 mm.
Mover adapter kit Eriba Touring Enables installation of a Mover on a chassis with a rectangular profile, such as the single-axle Eriba Touring caravan.
Mover spacer set 60 mm for height adjustment To balance out the height of caravans with a frame height of < 140 to 80 mm. Suitable for Mover systems built after 05/12.
Mover spacer set 30 mm for height adjustment To balance out the height of caravans with a frame height of < 170 to 110 mm. Suitable for Mover systems built after 05/12.
Easy clicK terminal clamps for the battery Connect and disconnect battery connections quickly and easily by hand. Suitable for all DIN and SAE connections. Suitable for currents up to 150 A at continuous load, 800 A at short-term load.
Adapter kit for AL-KO M frame 1900 – 2000 kg To balance out frame edges for the single-axle chassis AL-KO chassis M with continuous frame and a maximum permitted weight of 1900 kg to 2000 kg.
Mover adapter kit Eriba Troll Allows the installation of the Mover behind the axle of an Eriba Troll caravan.