Mover smart A4

Electric swivelling manoeuvring system with four motors for twin-axle caravans up to 2800 kilograms.

No heavy work, no cranking thanks to automatic engagement and disengagement
Parking with millimetre precision wherever you wish
Easy to install on any chassis thanks to the Truma quick-mounting system
Suitable for twin-axle caravans up to 2800 kg
5-year parts warranty in the case of a retrofit by a Truma Partner

The manoeuvring system for all eventualities

The Mover smart A4 is Truma's low-cost, fully automatic manoeuvring aid - with proven quality. The drive rollers are swivelled onto the tyres at the touch of a button - without any muscle power!

The rest is done with the remote control: you use it to manoeuvre the caravan. The soft start function ensures that the caravan starts without jerking and stops with millimetre precision. The caravan is braked as soon as you release the control buttons.

Effortless parking on the campsite following a strenuous journey.

Truma Mover smart A4 – leaves competing devices standing

Handle slopes of up to 10 per cent
Increased operational safety thanks to automatic stop function
Smooth and gentle parking thanks to remote control and soft-start function

Further Truma manoeuvring systems

That’s typical Truma: Extended warranty & full scope of service

If you purchase your Truma Mover smart A4 from us at a retail outlet, you will automatically receive a five year parts warranty. Three years more than standard – as we have confidence in the quality of our work. The warranty takes effect in the case of defects which can be attributed to material or manufacturing faults.

What’s more, you will also benefit from our full customer service with this product.

Compare Truma manoeuvring assistants for caravans

—

FAQs

Downloads

Videos

{{filteredFaqs.length}} FAQ

{{filteredFaqs.length}} FAQs

Download List

{{amountDownloads}} Download

{{amountDownloads}} Downloads

{{downloadGroup.name}}

Service Videos

{{filteredVideos.length}} video videos

The video was not found.

To category

Accessories

Find suitable accessories.

Mover PowerSet with charger BC 10	Together with the suitable battery, provides the power for the Mover. Consists of the charger BC 10, terminal clamps, temperature sensor and battery cut-off switch.	Truma charger BC 10
Mover adapter kit Eriba Touring	Enables installation of a Mover on a chassis with a rectangular profile, such as the single-axle Eriba Touring caravan.
Adapter kit for AL-KO M frame 1900 – 2000 kg	To balance out frame edges for the single-axle chassis AL-KO chassis M with continuous frame and a maximum permitted weight of 1900 kg to 2000 kg.
Adapter kit for AL-KO M to 1800 kg	To balance out frame edges for caravans with AL-KO M chassis with axial movement to 1800 kg maximum permitted weight.
Low chassis kit for height adjustment	To balance out the height of caravans with a frame height less than 80 mm (all Mover XT) or less than 110 mm ( Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV).
Mud guard set for Mover manoeuvring systems	Is used when the original mudflaps no longer fit after installation of the Mover behind the axle. Including instructions and template to adapt mud guards.
Battery cut-off switch for more safety	Interrupts the circuit and prevents the risk of short circuits. Is connected to the positive pole of the battery. Also useful as an additional anti-theft device.
Easy clicK terminal clamps for the battery	Connect and disconnect battery connections quickly and easily by hand. Suitable for all DIN and SAE connections. Suitable for currents up to 150 A at continuous load, 800 A at short-term load.
Mover adapter kit Eriba Troll	Allows the installation of the Mover behind the axle of an Eriba Troll caravan.
Mover spacer set 60 mm for height adjustment	To balance out the height of caravans with a frame height of < 140 to 80 mm. Suitable for Mover systems built after 05/12.
Low chassis kit short for height adjustment	To balance out the height of caravans with a frame height less than 80 mm (all Mover XTs) or less than 110 mm (Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV).
Short mounting system	Alternative mounting if the Mover cannot be attached because of substructures or interfering edges. In Germany, a test certificate (TÜV) is required, apart from Mover XT and Mover SX.
Adapter kit AL-KO Vario III / AV	Metal plates reinforce the frame and must be used for installation of the Mover on caravans with AL-KO Vario III / AV Single Chassis with a frame thickness of less than 2.8 mm.
Mover spacer set 30 mm for height adjustment	To balance out the height of caravans with a frame height of < 170 to 110 mm. Suitable for Mover systems built after 05/12.

print page back to top