Which gas cylinders can be measured with the Truma LevelCheck?
Truma LevelCheck is suitable for all steel and aluminium LPG gas cylinders with diameters of 200 to 350 mm. It cannot measure plastic cylinders because
Truma LevelCheck is suitable for all steel and aluminium LPG gas cylinders with diameters of 200 to 350 mm. It cannot measure plastic cylinders because
The production date is imprinted on the gas pressure regulator or gas hose.
According to DVGW work sheet G 607, pressure regulators and hoses must be replaced at the latest ten years after the production date. In France,
With motor homes as of construction year 01/2007, in accordance with the heating equipment directive 2001/56/EC with annexes 2004/78/EC and 2006/119/EC for the operation of
Yes, gas cylinders may be connected while driving. They are then considered to be equipment and not hazardous materials (ADR exemption in accordance with sections
No, because of approval restrictions in the installation regulations of EN 1949 and the limited space the Truma gas filter cannot be installed on gas tanks.
Vehicles registered before 2007 are protected by a grandfather clause and may still be operated with a gas regulator without a crash sensor while the
MonoControl CS (black) If the crash sensor has been triggered, it can be easily reset. Simply press the yellow reset button on the MonoControl CS
In Germany, the gas system must be inspected every two years by an LPG expert (DVFG, TÜV, DEKRA). This is documented with an inspection certificate
DuoControl CS automatically switches over to the second gas cylinder once the operating cylinder is empty. Watch the video to see how it works.
