Campervan in australian looking landscape

Truma Combi D 6

Powerful diesel heater for larger motor homes

  • The powerful, quiet fan ensures optimum warm air distribution
  • Compact and space-saving, which allows various installation options for Combi D 6
  • Low energy consumption
  • Truma Combi D 6 can also be operated with an empty water tank
  • FrostControl drain valve is installed
  • Infinitely variable temperature adjustment with the digital CP plus control panel
  • Automatic climate control possible in combination with a Truma air conditioner

More details about Truma Combi D 6

Truma Combi D 6 is a powerful diesel heater that can also be used to heat water. It is especially suitable for larger motor homes. It is supported by a fan so that the motor home heater also works while you’re driving. In summer, you can heat just the water without using the space heater.

Combi D 6 is extremely compact and an absolute lightweight compared to other heaters with a similar output. Your Combi heater is controlled simply with a digital control panel. In combination with a Truma air conditioner, you can also select the automatic climate control option on the control panel. This ensures that inside the vehicle you always have the desired temperature.

Facts about the Combi heater

Australian version of the Combi D heater
Truma Combi D 6 heats your vehicle and water at the same time. Enjoy twice the comfort with just one appliance.
Father and his son inside a caravan using the digital control panel CP plus
Set the required temperature for Truma Combi D 6 on the digital Truma CP plus control panel.

Truma Combi D 6: Operating instructions and more downloads

Truma Dealer

Services provided by Truma Dealers

  • Extensive range of Truma products
  • Expert advice

Find a Truma Dealer

Replace comparison appliance Add for comparison Back

Compare Truma Combi heating systems

Truma Combi D 6

Powerful diesel variant of the Combi heater – ideal for larger motor homes.

Energy sources Fuel, as per the Australian Fuel Standard (Automotive Diesel). Operation with any form of biodiesel is not permitted.
Operating pressure
Rated heat output
Rated heat output in gas mode
Rated heat output in electric mode 2000 W / 4000 W / 6000 W
Rated heat output in mixed mode
Fuel consumption 220 – 630 ml/h (110 ml/h with average heat output of 1000 W)
Power consumption
Power consumption (at 12 V): operation of heater and water container 1.8 – 7 A (in regular operation, between "Off" and “lowest operating level” less than 1.8 A)
Power consumption (at 12 V): heating water container max. 1.8 A
Power consumption (at 230 V)
Air flow rate (free-blowing)
Air flow rate (free blowing) with 4 warm air outlets max. 287 m³/h
Power supply
Operating voltage
Quiescent current approx. 1 mA
Quiescent current consumption CP plus VarioHeat
Quiescent current consumption CP plus (optional)
FrostControl heating element (optional)
Water capacity 10 litres
Pump pressure max. 280 kPa
System pressure max. 450 kPa
Heating time (from approx. 15 °C to approx. 60 °C): Water container approx. 20 min.
Heating time (from approx. 15 °C to approx. 60 °C): Heater and water container acc. to EN 15033 approx. 80 min.
Weight approx. 16.2 kg
Dimensions (L x W x H) 525 x 450 x 300 mm
Installation dimensions (minimum dimensions–additional space must be provided for the gas connection, water connections and drain valve (L x W x H) depending on the installation situation) 540 x 500 x 350 mm
Installation cut-outs (L x W x H)

Truma Combi 2 E

Combi 2 E with integrated electric heating elements for gas, electric or mixed modes and approx. 2000 W thermal output.

Energy sources Propane / butane + electricity
Operating pressure 2.75 kPa
Rated heat output
Rated heat output in gas mode max. 1950 W
Rated heat output in electric mode 980 W / 1960 W
Rated heat output in mixed mode max. 3900 W
Fuel consumption 130 g/h
Power consumption
Power consumption (at 12 V): operation of heater and water container max. 6.5 A for short periods (average approx. 1.2 A)
Power consumption (at 12 V): heating water container max. 0.4 A
Power consumption (at 230 V) 4.1 A / 8.1 A
Air flow rate (free-blowing)
Air flow rate (free blowing) with 4 warm air outlets max. 287 m³/h
Power supply
Operating voltage
Quiescent current approx. 1 mA
Quiescent current consumption CP plus VarioHeat
Quiescent current consumption CP plus (optional)
FrostControl heating element (optional)
Water capacity 10 litres
Pump pressure max. 280 kPa
System pressure max. 450 kPa
Heating time (from approx. 15 °C to approx. 60 °C): Water container approx. 23 min.
Heating time (from approx. 15 °C to approx. 60 °C): Heater and water container acc. to EN 15033 approx. 90 min.
Weight 16.2 kg
Dimensions (L x W x H) 510 x 450 x 300 mm
Installation dimensions (minimum dimensions–additional space must be provided for the gas connection, water connections and drain valve (L x W x H) depending on the installation situation) 540 x 500 x 350 mm
Installation cut-outs (L x W x H)

Truma Combi 4 E

Combi 4 E with additional integrated electric heating elements for gas, electric or mixed modes and approx. 4000 W thermal output.

Energy sources Propane / butane + electricity
Operating pressure 2.75 kPa
Rated heat output
Rated heat output in gas mode max. 3900 W
Rated heat output in electric mode 980 W / 1960 W
Rated heat output in mixed mode max. 3900 W
Fuel consumption 130 – 260 g/h
Power consumption
Power consumption (at 12 V): operation of heater and water container max. 6.5 A for short periods (average approx. 1.2 A)
Power consumption (at 12 V): heating water container max. 0.4 A
Power consumption (at 230 V) 4.1 A / 8.1 A
Air flow rate (free-blowing)
Air flow rate (free blowing) with 4 warm air outlets max. 287 m³/h
Power supply
Operating voltage
Quiescent current approx. 1 mA
Quiescent current consumption CP plus VarioHeat
Quiescent current consumption CP plus (optional)
FrostControl heating element (optional)
Water capacity 10 litres
Pump pressure max. 280 kPa
System pressure max. 450 kPa
Heating time (from approx. 15 °C to approx. 60 °C): Water container approx. 23 min.
Heating time (from approx. 15 °C to approx. 60 °C): Heater and water container acc. to EN 15033 approx. 90 min.
Weight 16.2 kg
Dimensions (L x W x H) 510 x 450 x 300 mm
Installation dimensions (minimum dimensions–additional space must be provided for the gas connection, water connections and drain valve (L x W x H) depending on the installation situation) 540 x 500 x 350 mm
Installation cut-outs (L x W x H)

Truma VarioHeat eco

High-performance, compact gas heater of the latest generation. Suitable for small vans, motorhomes and caravans.

Energy sources Propane / butane
Operating pressure 27.5 mbar (2.75 kPA)
Rated heat output 1258 W / 2708 W (4.53/9.575 MJ/h)x*
Rated heat output in gas mode
Rated heat output in electric mode
Rated heat output in mixed mode
Fuel consumption 90 g/h / 190 g/h
Power consumption 0.85 A / 3.65 A
Power consumption (at 12 V): operation of heater and water container
Power consumption (at 12 V): heating water container
Power consumption (at 230 V)
Air flow rate (free-blowing) 85 m³/h / 175 m³/h
Air flow rate (free blowing) with 4 warm air outlets
Power supply 12 V
Operating voltage
Quiescent current
Quiescent current consumption CP plus VarioHeat 4 mA
Quiescent current consumption CP plus (optional)
FrostControl heating element (optional)
Water capacity
Pump pressure
System pressure
Heating time (from approx. 15 °C to approx. 60 °C): Water container
Heating time (from approx. 15 °C to approx. 60 °C): Heater and water container acc. to EN 15033
Weight approx. 5,5 kg
Dimensions (L x W x H) 437 x 284 x 124 mm
Installation dimensions (minimum dimensions–additional space must be provided for the gas connection, water connections and drain valve (L x W x H) depending on the installation situation)
Installation cut-outs (L x W x H) ––

Truma Trumatic E 2400

Compact LPG heater as your main or secondary heater with low gas and electricity consumption.

Energy sources
Operating pressure
Rated heat output
Rated heat output in gas mode
Rated heat output in electric mode
Rated heat output in mixed mode
Fuel consumption
Power consumption
Power consumption (at 12 V): operation of heater and water container
Power consumption (at 12 V): heating water container
Power consumption (at 230 V)
Air flow rate (free-blowing)
Air flow rate (free blowing) with 4 warm air outlets
Power supply
Operating voltage
Quiescent current
Quiescent current consumption CP plus VarioHeat
Quiescent current consumption CP plus (optional)
FrostControl heating element (optional)
Water capacity
Pump pressure
System pressure
Heating time (from approx. 15 °C to approx. 60 °C): Water container
Heating time (from approx. 15 °C to approx. 60 °C): Heater and water container acc. to EN 15033
Weight
Dimensions (L x W x H)
Installation dimensions (minimum dimensions–additional space must be provided for the gas connection, water connections and drain valve (L x W x H) depending on the installation situation)
Installation cut-outs (L x W x H)

Truma Combi 4 E

Combi 4 E with additional integrated electric heating elements for gas, electric or mixed modes and approx. 4000 W thermal output.

Energy sources Propane / butane + electricity
Operating pressure 2.75 kPa
Rated heat output
Rated heat output in gas mode max. 3900 W
Rated heat output in electric mode 980 W / 1960 W
Rated heat output in mixed mode max. 3900 W
Fuel consumption 130 – 260 g/h
Power consumption
Power consumption (at 12 V): operation of heater and water container max. 6.5 A for short periods (average approx. 1.2 A)
Power consumption (at 12 V): heating water container max. 0.4 A
Power consumption (at 230 V) 4.1 A / 8.1 A
Air flow rate (free-blowing)
Air flow rate (free blowing) with 4 warm air outlets max. 287 m³/h
Power supply
Operating voltage
Quiescent current approx. 1 mA
Quiescent current consumption CP plus VarioHeat
Quiescent current consumption CP plus (optional)
FrostControl heating element (optional)
Water capacity 10 litres
Pump pressure max. 280 kPa
System pressure max. 450 kPa
Heating time (from approx. 15 °C to approx. 60 °C): Water container approx. 23 min.
Heating time (from approx. 15 °C to approx. 60 °C): Heater and water container acc. to EN 15033 approx. 90 min.
Weight 16.2 kg
Dimensions (L x W x H) 510 x 450 x 300 mm
Installation dimensions (minimum dimensions–additional space must be provided for the gas connection, water connections and drain valve (L x W x H) depending on the installation situation) 540 x 500 x 350 mm
Installation cut-outs (L x W x H)

Truma Combi 2 E

Combi 2 E with integrated electric heating elements for gas, electric or mixed modes and approx. 2000 W thermal output.

Energy sources Propane / butane + electricity
Operating pressure 2.75 kPa
Rated heat output
Rated heat output in gas mode max. 1950 W
Rated heat output in electric mode 980 W / 1960 W
Rated heat output in mixed mode max. 3900 W
Fuel consumption 130 g/h
Power consumption
Power consumption (at 12 V): operation of heater and water container max. 6.5 A for short periods (average approx. 1.2 A)
Power consumption (at 12 V): heating water container max. 0.4 A
Power consumption (at 230 V) 4.1 A / 8.1 A
Air flow rate (free-blowing)
Air flow rate (free blowing) with 4 warm air outlets max. 287 m³/h
Power supply
Operating voltage
Quiescent current approx. 1 mA
Quiescent current consumption CP plus VarioHeat
Quiescent current consumption CP plus (optional)
FrostControl heating element (optional)
Water capacity 10 litres
Pump pressure max. 280 kPa
System pressure max. 450 kPa
Heating time (from approx. 15 °C to approx. 60 °C): Water container approx. 23 min.
Heating time (from approx. 15 °C to approx. 60 °C): Heater and water container acc. to EN 15033 approx. 90 min.
Weight 16.2 kg
Dimensions (L x W x H) 510 x 450 x 300 mm
Installation dimensions (minimum dimensions–additional space must be provided for the gas connection, water connections and drain valve (L x W x H) depending on the installation situation) 540 x 500 x 350 mm
Installation cut-outs (L x W x H)

Truma VarioHeat eco

High-performance, compact gas heater of the latest generation. Suitable for small vans, motorhomes and caravans.

Energy sources Propane / butane
Operating pressure 27.5 mbar (2.75 kPA)
Rated heat output 1258 W / 2708 W (4.53/9.575 MJ/h)x*
Rated heat output in gas mode
Rated heat output in electric mode
Rated heat output in mixed mode
Fuel consumption 90 g/h / 190 g/h
Power consumption 0.85 A / 3.65 A
Power consumption (at 12 V): operation of heater and water container
Power consumption (at 12 V): heating water container
Power consumption (at 230 V)
Air flow rate (free-blowing) 85 m³/h / 175 m³/h
Air flow rate (free blowing) with 4 warm air outlets
Power supply 12 V
Operating voltage
Quiescent current
Quiescent current consumption CP plus VarioHeat 4 mA
Quiescent current consumption CP plus (optional)
FrostControl heating element (optional)
Water capacity
Pump pressure
System pressure
Heating time (from approx. 15 °C to approx. 60 °C): Water container
Heating time (from approx. 15 °C to approx. 60 °C): Heater and water container acc. to EN 15033
Weight approx. 5,5 kg
Dimensions (L x W x H) 437 x 284 x 124 mm
Installation dimensions (minimum dimensions–additional space must be provided for the gas connection, water connections and drain valve (L x W x H) depending on the installation situation)
Installation cut-outs (L x W x H) ––

Truma Trumatic E 2400

Compact LPG heater as your main or secondary heater with low gas and electricity consumption.

Energy sources
Operating pressure
Rated heat output
Rated heat output in gas mode
Rated heat output in electric mode
Rated heat output in mixed mode
Fuel consumption
Power consumption
Power consumption (at 12 V): operation of heater and water container
Power consumption (at 12 V): heating water container
Power consumption (at 230 V)
Air flow rate (free-blowing)
Air flow rate (free blowing) with 4 warm air outlets
Power supply
Operating voltage
Quiescent current
Quiescent current consumption CP plus VarioHeat
Quiescent current consumption CP plus (optional)
FrostControl heating element (optional)
Water capacity
Pump pressure
System pressure
Heating time (from approx. 15 °C to approx. 60 °C): Water container
Heating time (from approx. 15 °C to approx. 60 °C): Heater and water container acc. to EN 15033
Weight
Dimensions (L x W x H)
Installation dimensions (minimum dimensions–additional space must be provided for the gas connection, water connections and drain valve (L x W x H) depending on the installation situation)
Installation cut-outs (L x W x H)

Accessories for Truma Combi D 6

Find suitable accessories for your Truma Combi D 6. With the altitude kit, you’re well equipped for longer heating periods in the mountains.

Truma CP plus

Modern, digital control panel for Truma Combi heaters and air conditioning systems. With automatic climate control, boost function and time switch.
 

Digital Truma CP plus control panel

Modern, digital control panel for Truma Combi heaters and air conditioning systems. With automatic climate control, boost function and time switch.

  • Intuitive operation
  • Practical rotary push button, large display with background lighting
  • Convenient programming of water and room temperature

Warm air additional set

Contains

1 x Swivelling air outlet SCW 2, black
1 x Y-pipe 80
1 x Duct VR 72 x 3 meters in one length
4 x Air duct clamps to suit VR 72

Warm air additional set

Contains

1 x Swivelling air outlet SCW 2, black
1 x Y-pipe 80
1 x Duct VR 72 x 3 meters in one length
4 x Air duct clamps to suit VR 72

Warm air basic set

Contains

  • 1 x Wall cowl kit EW 24, cream
  • 1 x Air duct VR 80, 1 m
  • 2 x Swivelling air outlet SCW 2, black,
  • 1 x Cowl cover KKW-2, cream
  • 1 x Surface-mounting frame

 

Warm air basic set

Contains

  • 1 x Wall cowl kit EW 24, cream
  • 1 x Air duct VR 80, 1 m
  • 2 x Swivelling air outlet SCW 2, black,
  • 1 x Cowl cover KKW-2, cream
  • 1 x Surface-mounting frame

Pipe set CDW

Complete with sound mufflers for cumbustion air and exhaust, incl. lock washer and insulating duct. If the pipe set needs to be shortened, you will need to install the replacement lock washer with the lock washer tool.

Pipe set CDW Combi D 6

Complete with sound mufflers for cumbustion air and exhaust, incl. lock washer and insulating duct. If the pipe set needs to be shortened, you will need to install the replacement lock washer with the lock washer tool.

Optimum warm air distribution

Precisely coordinated modular system. Ensures even, comfortable heat distribution throughout the interior.

Air distribution for Truma warm air systems

Precisely coordinated modular system. Ensures even, comfortable heat distribution throughout the interior.

  • Adjustable flow direction
  • Controllable air volume
  • Quiet air circulation
  • Targeted warm air at thermal bridges 
  • Message
  • Service contact
  • Sales contact
  • Dealer / Service Partner

For any query concerning service or warranty please contact

1300 07 2018

Leisure-Tec Australia Pty Ltd
50 Metrolink Circuit
Campbellfield, VIC 3061
E-mail: service@leisure-tec.com.au

Truma type plate

For any query concerning sales please contact

1300 07 2018

Leisure-Tec Australia Pty Ltd
50 Metrolink Circuit
Campbellfield, VIC 3061
E-mail: sales@leisure-tec.com.au

Find your nearest Truma Expert

We use cookies to ensure optimum design and continuous improvement of our website. By using the website, you agree to the use of cookies. Accept More information