16 A automatic chargers
(BC 416 IU/BC 616 IU)
Compact power packs
- Available with one (BC 416 IU) or two (BC 616 IU) outputs
- Microprocessor-controlled switched-mode power supply technology
- Silent charging
- Function display via integrated LED or Panel BC connection
- Balancing of voltage fluctuations
- Temperature sensors for safety
- Changeover switch between liquid or gel/AGM batteries
- Ideal for the Mover® manoeuvring system
 | | | |
|---|---|---|---|
| BC 416 IU/BC 616 IU | BC 430 IU/BC 630 IU | BC 860 IU | |
| Voltage-input | 230 V (180 V–250V) ~, 50–60 Hz | 230 V (195 V–250V) ~, 0–60 Hz | 97 V–250 V ~, 0–60 Hz |
| Charging current, max. | 6 A | 30 A | 60 A (distributed across outputs 1 to 3) |
| Battery capacitiy | 50 Ah–160 Ah | 100 Ah–300 Ah | 200 Ah–600 Ah |
| Weight | 1,3 kg | 3 kg | 4,5 kg |
| Dimensions (L x W x H) | 220 x 210 x 90 mm | 302 x 173 x 100 mm | 400 x 290 x 110 |
| Part no. | C12501-01/ C12701-02 | C12501-02/ C12701-01 | C12901-01 |
Additional benefits of the BC 416 IU and BC 616 IU automatic chargers
- Reduction in charging current if the device gets too hot
- Temperature-controlled battery charging
- Electronic polarity reversal and overload protection
- Input B+ measurement cable + charger cable via cage tension spring clamp (no contact material)
- 230 V input via inlet connector for non-heating appliances
- Plug connection for optional battery temperature sensor
- Integrated status indicator (BC 416 IU) in the form of a green LED with flash code output in the event of malfunctions
- Changeover switch between liquid gel/AGM batteries
BC 616 IU automatic charger
- Second charging output (e.g. for starter battery)
- Integrated cut-off relay
- Automatic D+ detection
- Plug connector for Panel BC 616 with flash code output in the event of malfunctions
- Fuse holder with 30 A fuse
- Changeover switch between liquid gel/AGM batteries